jungas wrote:
on the left will be on a slide and there will be 2 drawers on the left.
nah, looks good mate. mind if i ask total cost of materials?
| auszookers.com http://auszookers.com/forum/ |
|
| Rear Drawers http://auszookers.com/forum/viewtopic.php?f=14&t=18875 |
Page 1 of 1 |
| Author: | jungas [ Sun Feb 06, 2011 7:08 am ] |
| Post subject: | Rear Drawers |
Just thought i'd throw up a few pics of the drawers I'm making for my zook. Fridge on the left will be on a slide and there will be 2 drawers on the left. Still have about 500mm from the top of the drawers to the roof for my swag, chair, jerry can etc. This has given me way more useable space than i thought it would. |
|
| Author: | whincup [ Mon Feb 07, 2011 1:13 am ] |
| Post subject: | Re: Rear Drawers |
jungas wrote: on the left will be on a slide and there will be 2 drawers on the left.
nah, looks good mate. mind if i ask total cost of materials? |
|
| Author: | jungas [ Mon Feb 14, 2011 7:57 pm ] |
| Post subject: | Re: Rear Drawers |
whincup wrote: jungas wrote: on the left will be on a slide and there will be 2 drawers on the left. nah, looks good mate. mind if i ask total cost of materials? All up so far including the slides as they are the most expensive part by far it has cost about $300. |
|
| Author: | jungas [ Mon Feb 14, 2011 8:02 pm ] |
| Post subject: | Re: Rear Drawers |
Update...... Just need to screw on the slides |
|
| Author: | zook95 [ Tue Feb 15, 2011 7:13 am ] |
| Post subject: | Re: Rear Drawers |
looks good mate |
|
| Author: | DarkHorse [ Tue Feb 15, 2011 10:48 am ] |
| Post subject: | Re: Rear Drawers |
Nice work. What are you using for slides? |
|
| Author: | jungas [ Tue Feb 15, 2011 7:27 pm ] |
| Post subject: | Re: Rear Drawers |
DarkHorse wrote: Nice work. What are you using for slides?
Heavy duty soft close joinery slides. |
|
| Author: | DarkHorse [ Wed Feb 16, 2011 1:09 am ] |
| Post subject: | Re: Rear Drawers |
Source and price? |
|
| Author: | jungas [ Wed Feb 16, 2011 3:18 am ] |
| Post subject: | Re: Rear Drawers |
DarkHorse wrote: Source and price?
From a mate who is a joiner, about $85 for 3 sets. |
|
| Author: | DarkHorse [ Wed Feb 16, 2011 5:28 am ] |
| Post subject: | Re: Rear Drawers |
That's not bad if they are good for the weight. I'm building a set soon, just trying to source some genuinely HD sliders for less than $200 a pop. Will keep looking. |
|
| Author: | jungas [ Wed Feb 16, 2011 5:40 am ] |
| Post subject: | Re: Rear Drawers |
Yea the ones i am getting should be closer to $80 a pair but luckily i am getting them for cost. |
|
| Author: | DarkHorse [ Wed Feb 16, 2011 6:20 am ] |
| Post subject: | Re: Rear Drawers |
Damn you! Grab another 3 pairs while you're at it! 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|