auszookers.com • View topic

Board index » Talking About Stuff » I made it and fabrication

awesome welds

Page 1 of 9

[ 247 posts ]

Go to page 1, 2, 3, 4, 5 ... 9 Next

Print view

Previous topic | Next topic

Author

Message

Shansh

az supporter

Joined: Sun May 23, 2010 9:35 am
Posts: 1816
Location: Goulburn NSW
Vehicle: Ducati Monster

Posted: Fri Jul 01, 2011 3:58 am

there is obviously some gun fabricators on here so after seeing a similar thread on an off road racing forum though AZ must be able to do better than those boys, so anybody who has some pics of some shit hot welding they (or someone else for that matter) has done, I for one would love to see it

bails

az supporter

Joined: Tue Aug 04, 2009 11:30 pm
Posts: 131
Location: darwin

Posted: Fri Jul 01, 2011 5:34 am

nothing car related but here is somthing i made up at work this week. it bolts on to the side of a ship and discharges the waste water from the heat exchanger on the A/C system.

i thought i pull out some good ally welds. :lol:

Ridge

Joined: Tue Jun 16, 2009 11:30 pm
Posts: 942
Location: Brisbane
Vehicle: sierra leaf sprung buggy

Posted: Fri Jul 01, 2011 5:40 am

Fatzook did these for me

_________________
4age zook ute, in lots of bits

Kermy87

Joined: Mon Sep 13, 2010 10:13 am
Posts: 348
Location: Hervey bay QLD

Posted: Fri Jul 01, 2011 5:55 am

Here's a canopy I built with a mate a while ago pretty pissed at the time, this is the latch internal,, chook Shit welds with a mig,, see if u can spot the cock up

Measure twice,, weld once

_________________
Sik as drover, 32" mongrels, 4age 20v, 2" sus, 2"

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Fri Jul 01, 2011 6:06 am

Imma no welder but I thought these looked ok at the time and haven't fallen off yet.

TIG'd

Note the Suzuki factory welds in the 1st and 3rd pic.

_________________
Lil Foot!
http://tiny.cc/gtsw1

dano_mung

Joined: Sun May 17, 2009 11:30 pm
Posts: 237
Location: Brisbane

Posted: Fri Jul 01, 2011 6:21 am

Kermy87 wrote:

Here's a canopy I built with a mate a while ago pretty pissed at the time, this is the latch internal,, chook Shit welds with a mig,, see if u can spot the cock up

Measure twice,, weld once

Ah is the latch stop on the wrong side and now won't allow the latch to open?

_________________
I drive my Daihatsu like its a Suzuki!

Kermy87

Joined: Mon Sep 13, 2010 10:13 am
Posts: 348
Location: Hervey bay QLD

Posted: Fri Jul 01, 2011 6:45 am

dano_mung wrote:

Kermy87 wrote:

Here's a canopy I built with a mate a while ago pretty pissed at the time, this is the latch internal,, chook Shit welds with a mig,, see if u can spot the cock up

Measure twice,, weld once

Ah is the latch stop on the wrong side and now won't allow the latch to open?

It was meant to be the spacer under the latch

_________________
Sik as drover, 32" mongrels, 4age 20v, 2" sus, 2"

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14491
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Fri Jul 01, 2011 6:56 am

bails wrote:

nothing car related but here is somthing i made up at work this week. it bolts on to the side of a ship and discharges the waste water from the heat exchanger on the A/C system.

i thought i pull out some good ally welds. :lol:

hay bails. do you work for pirkins?

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Fri Jul 01, 2011 7:21 am

Dam it! I knew i should have taken a pic of the full pen weld i did at work the other day with flux core

Some nice welds in the pics above to

_________________
Tell my arse, he actually gives a crap!

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Fri Jul 01, 2011 8:40 am

These are done by Brian at suzistore:

_________________

andrew88

az supporter

Joined: Fri Oct 02, 2009 11:30 pm
Posts: 185
Location: south brissy

Posted: Fri Jul 01, 2011 9:21 am

ally tig, 3mm rhs to 2mm end plate.

ally mig, 3 passes, 20mm base plate to 6mm extrusion ( do this at work every day)

mnemonix

az supporter

Joined: Sun Aug 16, 2009 11:30 pm
Posts: 1409
Location: Newcastle NSW
Vehicle: '96 LWB trayback

Posted: Fri Jul 01, 2011 9:33 am

Andrew88:
in the ally mig photo, do you use pulse mode? Just looks like each "dime" has a cool spot in the centre.
What action do you use with the torch/gun? ie: cursive "e's" etc.

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Fri Jul 01, 2011 10:05 am

alien wrote:

These are done by Brian at suzistore:

naughty naughty............who needs a visible chassis number eh?

_________________
builder of custom road legal zooks......and stuff.

andrew88

az supporter

Joined: Fri Oct 02, 2009 11:30 pm
Posts: 185
Location: south brissy

Posted: Fri Jul 01, 2011 11:11 am

mnemonix wrote:

Andrew88:
in the ally mig photo, do you use pulse mode? Just looks like each "dime" has a cool spot in the centre.
What action do you use with the torch/gun? ie: cursive "e's" etc.

Pritty sure the welder isn't set up for pulse. I do circle's to get that affect (which may be cursive e's now that i think about it). Apart of my procedure is to heat the base plate to 200 degrees with a oxy, then weld straight away. I was getting too much undercut with other methods i tryed. I've been approved for this procedure by engineer.

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Fri Jul 01, 2011 11:14 am

Andrew88: Any pics of welding ally with the old TIG? Nice welding BTW!

_________________
Tell my arse, he actually gives a crap!

bails

az supporter

Joined: Tue Aug 04, 2009 11:30 pm
Posts: 131
Location: darwin

Posted: Fri Jul 01, 2011 12:04 pm

shep wrote:

hay bails. do you work for pirkins?

no. work for the defence.

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Fri Jul 01, 2011 1:11 pm

joeblow wrote:

alien wrote:

These are done by Brian at suzistore:

naughty naughty............who needs a visible chassis number eh?

the first bit is all the same anyway =P haha

_________________

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Jul 01, 2011 1:27 pm

_________________
You're just hating because you don't understand

andrew88

az supporter

Joined: Fri Oct 02, 2009 11:30 pm
Posts: 185
Location: south brissy

Posted: Fri Jul 01, 2011 8:41 pm

monkey wrote:

Andrew88: Any pics of welding ally with the old TIG? Nice welding BTW!

cheers. the top pic is ally tig and bottom is ally mig.

PJ.zook

az supporter

Joined: Sat Oct 24, 2009 10:30 pm
Posts: 845
Location: Melbourne

Posted: Fri Jul 01, 2011 9:33 pm

Will have to post pictures of a supposed 'professional' workshop whom outfit the interiors of work vans, utes etc... with shelving, workbenches and the like.
The job they did on my new van, migod a chimpanzee would be disgusted at the quality of the job, the welds look like they just had a bird shit directly on the joins, then painted over it, and that's just the beginning.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8136
Location: Sunshine Coast Qld

Posted: Fri Jul 01, 2011 9:53 pm

Feraltech TIG welding on my rear lower arm brackets.

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Sat Jul 02, 2011 4:52 am

i love looking at fab work and then looking at the original suzuki welds... so much over kill

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Sat Jul 02, 2011 7:10 am

Wing welds on the JML Sierra bar....

_________________
builder of custom road legal zooks......and stuff.

3cyl

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 2054
Location: Ipswich

Posted: Sat Jul 02, 2011 7:17 am

That's art!

_________________
awesome only comes in 2 colours, camo & bare metal

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Sat Jul 02, 2011 7:55 am

joeblow wrote:

Wing welds on the JML Sierra bar....

Not bad

_________________
Shep is a closet jimny lover!!!!

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Sat Jul 02, 2011 8:07 am

3cyl wrote:

That's art!

_________________
Tell my arse, he actually gives a crap!

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Jul 02, 2011 8:09 am

show off

_________________
You're just hating because you don't understand

Shansh

az supporter

Joined: Sun May 23, 2010 9:35 am
Posts: 1816
Location: Goulburn NSW
Vehicle: Ducati Monster

Posted: Sat Jul 02, 2011 12:26 pm

love it, boobs in one thread, sexy welding in another thread, keep em coming boys (and girls), i am a shithouse welder, hence I love looking at work people who know wtf they are doing have done

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Sun Jul 03, 2011 7:48 am

The sexiest welds I've seen

(not done by me)

_________________
Own a weird looking coily sh!tbox!

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Sun Jul 03, 2011 8:26 am

Rusho wrote:

What is it from Corey??

All done by Camburg OffRoad in the states, rear diff and roll cage in one of their trophy trucks... don't know much more info than that

_________________
Own a weird looking coily sh!tbox!

Page 1 of 9

[ 247 posts ]

Go to page 1, 2, 3, 4, 5 ... 9 Next

Board index » Talking About Stuff » I made it and fabrication

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum