auszookers.com
http://auszookers.com/forum/

diy sierra snorkel
http://auszookers.com/forum/viewtopic.php?f=14&t=34503		 Page 1 of 1
Author:  sjzook [ Thu Jul 26, 2012 7:57 pm ]
Post subject:  diy sierra snorkel
hey guys just made my snorkel for the sierra
cost me nothing as im a plumber but material would be about $20
used 50mm pressure pipe and a few bends, took me about 10 mins and it was done. It is not a show car and it will be used for rough stuff so not too keen about paying 400 for a snorkel.

anyway here are a few shitty pics
Author:  suzukikid [ Sat Jul 28, 2012 11:51 am ]
Post subject:  Re: diy sierra snorkel
I has a pvc snorkel on my first one.....worst idea ever!

Dont glue the joins and keep spare lengths in ya car....as soon as they hit something they shatter....
Author:  sjzook [ Sat Jul 28, 2012 3:20 pm ]
Post subject:  Re: diy sierra snorkel
It shouldn't it is pressure pipe which is a higher grade thickness than standard. But I'd prefer it to shatter than damage the car I suppose haha thx
Author:  suzukikid [ Sat Jul 28, 2012 4:44 pm ]
Post subject:  Re: diy sierra snorkel
yeah but if you have no spares then ya snorkel is a hole stright into the airbox/engine
Author:  sjzook [ Sat Jul 28, 2012 4:49 pm ]
Post subject:  Re: diy sierra snorkel
Yeh keep a metre spare in the car and a plumbquick spare too.
Author:  tonyevans [ Sun Jul 29, 2012 10:15 am ]
Post subject:  Re: diy sierra snorkel
Or don't go in the river if it's broke
Author:  Macca52 [ Fri Sep 07, 2012 9:19 pm ]
Post subject:  Re: diy sierra snorkel
I have the same on mine which I made when I had the std 1.3. I fitted a GTI twin cam and thought it was still OK but I disconnected it last weekend and I think I picked up another 20 hp. Much more responsive at the top end. The 50mm pipe was restricting the airflow. About to try 75mm stainless. Always wondered why my exhaust was always black - car was running rich.
Author:  Macca52 [ Fri Sep 07, 2012 9:22 pm ]
Post subject:  Re: diy sierra snorkel
:idea: I have the same on mine which I made when I had the std 1.3. I fitted a GTI twin cam and thought it was still OK but I disconnected it last weekend and I think I picked up another 20 hp. Much more responsive at the top end. The 50mm pipe was restricting the airflow. About to try 75mm stainless. Always wondered why my exhaust was always black - car was running rich. :idea:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/