| auszookers.com http://auszookers.com/forum/ |
|
| How to make a Travel Ramp ? http://auszookers.com/forum/viewtopic.php?f=14&t=5071 |
Page 1 of 1 |
| Author: | steve [ Fri Jun 05, 2009 11:57 pm ] |
| Post subject: | How to make a Travel Ramp ? |
I am thinking about building a travel ramp. I guess i could search. But that'd be no fun.. so what's the go with travel ramp specs? How long? how steep etc? and i;m sure i've asked this before, but what;s the rules with a travel ramp comp? "wheel base vs width" etc ? |
|
| Author: | lump_a_charcoal [ Fri Jun 05, 2009 11:58 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
I think 30 degrees is the important bit, length depends on the ability of the vehicles using it... |
|
| Author: | Westie [ Sat Jun 06, 2009 12:27 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
Get to it mate. Should only be a carton job so should be ready by Sunday 30 Deg and away ya go 2mt in height should do it |
|
| Author: | steve [ Sat Jun 06, 2009 12:34 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
i might work on it tomorrow westie.. as long as my scrap bits... |
|
| Author: | steve [ Sun Jun 07, 2009 12:35 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
Does anyone know the formular for travel ramp comps? wheelbase x height divided by 1000? or something weird like that. |
|
| Author: | steve [ Sun Jun 07, 2009 12:43 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
ok i think it's this... but not exactly sure distance divided by wheelbase x 1000 |
|
| Author: | steve [ Sun Jun 07, 2009 12:49 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
all made, out of scrap so it's not real pretty, but seems to work. |
|
| Author: | ajsr [ Sun Jun 07, 2009 1:01 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
looks ok to me steve (better than the one we made) flex looks goods too. how high is the backwheel to the ground? |
|
| Author: | steve [ Sun Jun 07, 2009 1:13 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
I'm not sure how high the wheel is but i'll have a play tomorrow. It wasn't fully flexed bu i didn't want to go further because the wheel was going offline a bit. The tyres were wet and slid across the bars a bit... i'll have to address the sideways grip issue i think. The top of the ramp is about 1780mm high. Outside measurement of the wheels/diff is 1720mm i think, so if i get near the top the diff would be vertical... could be scary , but i don't think it will flex that much anyway. The back flexes more than the front because the front is limited by the shock length. |
|
| Author: | Zook_Fan [ Sun Jun 07, 2009 1:43 am ] |
| Post subject: | Re: How to make a Travel Ramp ? |
yeah RTI is distance up ramp divided by your wheel base x 1000 like you said. and steve I'm not doubting your buggy here but i really dont think it will quite flex the width. check this out though: http://www.youtube.com/watch?v=vkHSYfqK ... L&index=47 |
|
| Author: | brendan [ Sat Jun 13, 2009 6:05 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
Zook_Fan wrote: yeah RTI is distance up ramp divided by your wheel base x 1000 like you said. and steve I'm not doubting your buggy here but i really dont think it will quite flex the width. check this out though: http://www.youtube.com/watch?v=vkHSYfqK ... L&index=47
is there realy much point of having that much flex? |
|
| Author: | joeblow [ Sat Jun 13, 2009 6:19 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
even uses a suzuki axle............
|
|
| Author: | Trojan [ Sat Jun 13, 2009 6:20 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
brendan wrote: is there realy much point of having that much flex?
For what that thing was built to do, yes there is. His score and absolute smashing of the opposition at TT this year is proof that it works. |
|
| Author: | brendan [ Sat Jun 13, 2009 7:51 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
Trojan wrote: brendan wrote: is there realy much point of having that much flex? For what that thing was built to do, yes there is. His score and absolute smashing of the opposition at TT this year is proof that it works. so he only ramps that thing? what a waste |
|
| Author: | Scrawny [ Sat Jun 13, 2009 8:17 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
| Author: | Trojan [ Sat Jun 13, 2009 8:26 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
brendan wrote: Trojan wrote: brendan wrote: is there realy much point of having that much flex? For what that thing was built to do, yes there is. His score and absolute smashing of the opposition at TT this year is proof that it works. so he only ramps that thing? what a waste Do you honestly not know what vehicle that is or who is driving it. |
|
| Author: | Zook_Fan [ Sat Jun 13, 2009 9:18 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
do you know what tough truck is?? |
|
| Author: | lump_a_charcoal [ Sat Jun 13, 2009 10:10 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
brendan wrote: is there realy much point of having that much flex? No, your avatar looks much better. |
|
| Author: | just_cruizin [ Sat Jun 13, 2009 11:00 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
Best you google Tuff Trucks |
|
| Author: | brendan [ Sat Jun 13, 2009 11:26 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
yer ive been to tuff truck. i dont know what car or whos it is, enlighten me |
|
| Author: | Trojan [ Sat Jun 13, 2009 11:43 pm ] |
| Post subject: | Re: How to make a Travel Ramp ? |
brendan wrote: yer ive been to tuff truck. i dont know what car or whos it is, enlighten me
Look at the start of the clip, then start cross referencing the name to a lot of offroad competitions, including previous Tuff Trucks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|