| auszookers.com http://auszookers.com/forum/ |
|
| Tube Tray http://auszookers.com/forum/viewtopic.php?f=14&t=6177 |
Page 1 of 1 |
| Author: | steve [ Sun Aug 23, 2009 8:17 pm ] |
| Post subject: | Tube Tray |
Yesterday i started making a bracket for some rear lights, then it went a bit crazy from there and turned in to something completely different. Last night i was playing with Photoshop.... I used this photo from last weekend...
and made a tube tray design.....
so today i had to make the damn thing...i changed it a little and added some side rails (these were the light brackets i made yesterday, now they're side rails)
I flexed it on the ramp to see where the tyres go... very close but all clear...
I'm only half way through, i still have to add some round lights in the back section. This is all scrap, i used an old sierra rollbar hoop for the top tube, and the rear supports from the rollbar for the lower tube.
|
|
| Author: | Scrawny [ Sun Aug 23, 2009 8:38 pm ] |
| Post subject: | Re: Tube Tray |
Looks good Steve! Is this the work you had for me yesterday? |
|
| Author: | steve [ Sun Aug 23, 2009 8:48 pm ] |
| Post subject: | Re: Tube Tray |
ScrawnC wrote: Is this the work you had for me yesterday?
nah, started this today. I have a 2L V6 front cut that just needs a fool tank and pump and then we're ready for ignition. There's too many projects around here |
|
| Author: | Scrawny [ Sun Aug 23, 2009 9:01 pm ] |
| Post subject: | Re: Tube Tray |
Is the V6 going in the other Sierra? |
|
| Author: | steve [ Sun Aug 23, 2009 9:12 pm ] |
| Post subject: | Re: Tube Tray |
yer , this one...
|
|
| Author: | steak_knife [ Sun Aug 23, 2009 10:36 pm ] |
| Post subject: | Re: Tube Tray |
Ooooo!! V6 in a zook |
|
| Author: | just_cruizin [ Mon Aug 24, 2009 1:27 am ] |
| Post subject: | Re: Tube Tray |
You still want my fuel tank Steve. What's the motive to tray the buggy, a bit more rear weight?? |
|
| Author: | want33s [ Mon Aug 24, 2009 4:00 am ] |
| Post subject: | Re: Tube Tray |
steve wrote: This is all scrap, i used an old sierra rollbar hoop for the top tube, and the rear supports from the rollbar for the lower tube.
![]() Barwork looks good Steve.. Will be nice with a bit of red "Bodywork" in between. Brendan would be proud to know that his Zook is going to good use !!!! |
|
| Author: | steve [ Mon Aug 24, 2009 10:33 am ] |
| Post subject: | Re: Tube Tray |
Greg, I have some lights i wanted to put on the back, and thought it might be good to have it looking a bit more like a ute instead of a buggy. There's not much weight in the bar work at the moment, but i guess when it's finished there might be, not sure if that'll be a good thing or not. It may also reduce clearence capabilities, so i guess we'll find out. want33s, i couldn't sell the bar so thought i better chop it up. |
|
| Author: | BlueSuzy [ Mon Aug 24, 2009 1:55 pm ] |
| Post subject: | Re: Tube Tray |
Looks better steve! |
|
| Author: | steve [ Fri Sep 04, 2009 10:03 pm ] |
| Post subject: | Re: Tube Tray |
Did a bit more today..... put some lights in, yeah all orange, coz that's what i had, i might splash out and get some red ones one day..
|
|
| Author: | just_cruizin [ Sat Sep 05, 2009 5:55 pm ] |
| Post subject: | Re: Tube Tray |
Even space for a number plate |
|
| Author: | steve [ Sat Sep 05, 2009 10:04 pm ] |
| Post subject: | Re: Tube Tray |
not quite enouh space for a plate Greg , bugger eh. coz i have some custom plates to go on somewhere. did some more today, just cleaned it up a bit and put some paint on..
|
|
| Author: | alex [ Sun Sep 06, 2009 2:38 am ] |
| Post subject: | Re: Tube Tray |
looks awsome steve now you can make me one |
|
| Author: | steve [ Sun Sep 06, 2009 12:02 pm ] |
| Post subject: | Re: Tube Tray |
wait till you roll it a few times and your car looks like 11_evl's, then we can chop it up |
|
| Author: | alex [ Sun Sep 06, 2009 1:26 pm ] |
| Post subject: | Re: Tube Tray |
| Author: | appsie [ Mon Sep 07, 2009 1:16 am ] |
| Post subject: | Re: Tube Tray |
i like the look of it now steve,looks a bit more complete......nice work now plates and rego haha matt |
|
| Author: | 31zook [ Wed Sep 09, 2009 10:08 pm ] |
| Post subject: | Re: Tube Tray |
well you should share appsie i can't find much...hmmm |
|
| Author: | appsie [ Thu Sep 10, 2009 2:48 am ] |
| Post subject: | Re: Tube Tray |
there are pics on outers in the trips section.on one of the huge QLD trip driving some cool rocky creek beds and stuff.will try find em is a cool truck |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|