| auszookers.com http://auszookers.com/forum/ |
|
| r & b industries rear storage http://auszookers.com/forum/viewtopic.php?f=14&t=7562 |
Page 1 of 1 |
| Author: | laurie [ Wed Oct 28, 2009 4:23 am ] |
| Post subject: | r & b industries rear storage |
i made this box to store stuff yesterday 12mm ply screw & glue (rough and bodgey) but it has a place for jerry and gives me a flat load area all up cost of $120 including jerry |
|
| Author: | coilyzook [ Wed Oct 28, 2009 4:31 am ] |
| Post subject: | Re: r & b industries rear storage |
i like it, have you got any build pics, im thinking of doing a similar sort of thing |
|
| Author: | laurie [ Wed Oct 28, 2009 12:26 pm ] |
| Post subject: | Re: r & b industries rear storage |
no sorry just take measurements to mr ply&wood (free cutting) bag of screws, glue, contact adhesive,hinges, and a mat from carpet court best thing is you can make it custom to your requirements. do base first, then put all walls on, then fixed top pieces, hinged doors finish with carpet and paint. contact is very messy. laurie |
|
| Author: | S13RR4 [ Wed Oct 28, 2009 2:54 pm ] |
| Post subject: | Re: r & b industries rear storage |
coilyzook wrote: i like it, have you got any build pics, im thinking of doing a similar sort of thing
i did a similar thing in my softy, bit bigger though, check out this thread for some build-up pictures http://www.auszookers.com/index.php?nam ... pic&t=7504 p.s. how do you go with accessing stuff when you've got stuff on top, is there a rear access door or anything??? |
|
| Author: | lump_a_charcoal [ Wed Oct 28, 2009 3:19 pm ] |
| Post subject: | Re: r & b industries rear storage |
Now you can take all that stuff out of your overhead console Laurie! |
|
| Author: | BlueSuzy [ Wed Oct 28, 2009 3:59 pm ] |
| Post subject: | Re: r & b industries rear storage |
You might want to put one on the roof too for that trip to Kath! |
|
| Author: | laurie [ Wed Oct 28, 2009 5:06 pm ] |
| Post subject: | Re: r & b industries rear storage |
i left enough room at the front for the fridge the only other heavy thing on top hopefully will be a water bottle no rear door the cut out bit is to get the shovel out easier the overhead console has auto eject too lazy to put it all back rods are going on the inside of the roof no way im going to put anything on the outside only me and my boy going to katherine so room should not be a problem really an esky and a change of clothes what else do ya need |
|
| Author: | ball [ Wed Oct 28, 2009 5:21 pm ] |
| Post subject: | Re: r & b industries rear storage |
laurie wrote: i left enough room at the front for the fridge
the only other heavy thing on top hopefully will be a water bottle no rear door the cut out bit is to get the shovel out easier the overhead console has auto eject too lazy to put it all back rods are going on the inside of the roof no way im going to put anything on the outside only me and my boy going to katherine so room should not be a problem really an esky and a change of clothes what else do ya need It's a suzuki, so a tool box would need to be included |
|
| Author: | laurie [ Wed Oct 28, 2009 7:53 pm ] |
| Post subject: | Re: r & b industries rear storage |
good idea ball i might find a broken down toyota |
|
| Author: | BUZOOKA [ Wed Nov 04, 2009 12:05 am ] |
| Post subject: | Re: r & b industries rear storage |
laurie wrote: good idea ball i might find a broken down toyota
\ |
|
| Author: | laurie [ Wed Nov 03, 2010 2:07 am ] |
| Post subject: | Re: r & b industries rear storage |
i have added a rear shelf over the back door 320mm x 1040mm x 12mm ply held in by ally right angle. with rear tie down points. cost about $10 ill use it next time i go camping for all the bulky stuff towels,tarps, coats ect i reckon it would hold 10 to 15 kg off road easy. now to redo the front one to hold both radio's and the clock. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|