auszookers.com
http://auszookers.com/forum/

Rear Drawers and Fridge Slide SWB Vitara
http://auszookers.com/forum/viewtopic.php?f=14&t=8438		 Page 1 of 1
Author:  royce [ Sun Dec 06, 2009 3:16 am ]
Post subject:  Rear Drawers and Fridge Slide SWB Vitara
Well not quite yet but its part way there :)

I wanted to replace my ageing skateboard bearing fridge slide for a while and make some drawers up to get a bit of space back whilst keeping things light and simple cause I am lazy

heres some pics so far, the fridge slide is a set of 700mm bottom mount runners and will have a 500mm drawer under it and 700mm drawer beside it (the short drawer is for room to put some other stuff in front of it behind the seat)

total cost so far is about $90 for runners, $32 for ply and I will need to get some kind of rails to attach my fridge tie downs too and some latches to keep them shut when moving
Author:  jimbo_jones [ Sun Dec 06, 2009 3:51 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
looking good 8) I built a set similar in my 100 series
Author:  Bruce [ Sun Dec 06, 2009 4:16 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Great looking shed in the background there Royce :-)
You did all that as well as doing something else during the day as well :-)
What a guy you are :-)
Author:  Scrawny [ Sun Dec 06, 2009 1:50 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Bruce wrote:
Great looking shed in the background there Royce :-)


I was going to say the same thing!! :lol: :lol: :lol:
Author:  Westie [ Tue Dec 08, 2009 1:58 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Royce where did you get the rails from as I am at the moment doing a set of draws Etc. for the cruiser.
Author:  royce [ Tue Dec 08, 2009 2:42 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
www.hardware.net.au or google elraco, they are the 45kg ones and are hafle brand

or universal engineering supplies list them too, along with teh spring latches to keep them closed
Author:  jimbo_jones [ Tue Dec 08, 2009 2:46 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
I got my set of ebay
Author:  Westie [ Tue Dec 08, 2009 1:59 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Thanks guys will look into them when I get to that stage.
Author:  royce [ Thu Dec 31, 2009 2:35 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Did some more and finally finished to the point of being useable

some things I noticed along the way

drawer runners suck, they really need to be in a frame a lot stiffer than what I made :)
leave more room around the drawers than you think to allow for sagging when loaded etc

latches that are simple and cheap are impossible to find, I did numerous laps of bunnings trying to come up with something then these hit me in the face, they are simple door latches that were like $6 so my drawers latch shut by themselves and once I make up some handles will be simple to open while opening the draw, I really didnt want to use patio bolts or padbolts, I would forget and leave em unlocked and drive off ang bang bang bang down the road :)
Author:  Westie [ Thu Dec 31, 2009 3:30 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Sometimes Royce you just have to forget about the Norm and go with what works for the job at hand. Looks better now, what is next some lights and power plugs.
Author:  just_cruizin [ Thu Dec 31, 2009 3:34 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
45kg runners are your problem, need to be about 75kg to 100. bit more expensive but worth it. There is also a locking slide available that locks both in and out.

For some reason I'm not a fan of ply, even though I can get it for free, for a strength to weight comparasion taking into account life as well it just feels like you have to go too thick to be viable.

nice job though :wink: I'd love a set of draws in the cruiser but the wife says NO. I'd be making a fridge slide tomorrow if there was a steel merchant open where I could get some angle.
Author:  Polar_Bear [ Thu Dec 31, 2009 4:23 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
i reckon ya need to beef them up a bit, they look a bit too flimsy to last all that long over a heap of rough tracks or corrugations, with a loaded fridge, theres a fair bit or weight up there you're trying to restrain :wink: maybe you should do a search on here, i remember someone posting up a good set up not so long ago :wink: oh fuck! i thought i was somewhere else for a while
Author:  atari4x4 [ Thu Dec 31, 2009 4:30 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Polar_Bear wrote:
i reckon ya need to beef them up a bit, they look a bit too flimsy to last all that long over a heap of rough tracks or corrugations, with a loaded fridge, theres a fair bit or weight up there you're trying to restrain :wink: maybe you should do a search on here, i remember someone posting up a good set up not so long ago :wink: oh fuck! i thought i was somewhere else for a while



so your the man to see about custom wood work hey!
Author:  Polar_Bear [ Thu Dec 31, 2009 4:33 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
i once made a storage rack similar to the one pictured, works ok far a few trips, but full fridges are farkin heavy :?
Author:  just_cruizin [ Thu Dec 31, 2009 4:39 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
did you make a step so you can reach inside the fridge :thefinger:
Author:  Joe [ Thu Dec 31, 2009 11:50 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Nice work Royce :goodjob: so when are ya gunna put the spoiler on?????????
Author:  Westie [ Thu Dec 31, 2009 12:28 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
just_cruizin wrote:
did you make a step so you can reach inside the fridge :thefinger:



Now that was a bit harsh Greg 1 day NFI may need the help of someone like Royce and you will wonder why he will be so short with you.
Author:  royce [ Thu Dec 31, 2009 1:09 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
just_cruizin wrote:
45kg runners are your problem, need to be about 75kg to 100. bit more expensive but worth it. There is also a locking slide available that locks both in and out.

For some reason I'm not a fan of ply, even though I can get it for free, for a strength to weight comparasion taking into account life as well it just feels like you have to go too thick to be viable.

nice job though :wink: I'd love a set of draws in the cruiser but the wife says NO. I'd be making a fridge slide tomorrow if there was a steel merchant open where I could get some angle.


Bruce has 100kg runners that still sag, I am only talking about 3mm here

yeah the locking slides would of been useful, didnt know about them until too late :)

Steel would either be too complex to make up for my attention span or too heavy, I have never had more in my fridge that I cant lift it full onto the slide and the rest of my camping gear I can carry to the car in one go so this is really for something to do and a bit of convenience than any hard core storage :)

but if it falls apart I will post vids of the fire and then design something a bit better rather than make it up as I go :lol:
Author:  just_cruizin [ Thu Dec 31, 2009 2:16 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Westie wrote:
and you will wonder why he will be so short with you.


Royce is short with everyone :rofl:

Wood/steel/alloy/crepe paper at least you have made them. Better then my non-exsistant ones. Plus I tend to over engineer, so yours will most probably be fine.
Author:  royce [ Thu Dec 31, 2009 2:29 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
It doesnt rattle, thats the biggest shock of all :)
Author:  just_cruizin [ Thu Dec 31, 2009 3:02 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
royce wrote:
It doesnt rattle, thats the biggest shock of all :)


Well thats 1/2 the battle won then
Author:  Fanger [ Tue Jan 12, 2010 1:22 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
Thanks for the thread Royce, its good to see people given it a go and sharing ideas.

I saw a similar design in the back of a 100 series.

For the sliding action of the shelves he went down the road of butchers plastic. Basically he cut 2 inch wide strips fixes some to the bottom of the draw and the rest to floor of his 4by. No issues of weight on your runners for they are also your support for the draw :). I opened the heavily packed draws and found they slid freely and easily.

He was saying that this type of slide never fails even after having fun in the bush.

The fridge slide could use the same idea the only prob would be the weight from the extra materials needed to make it work.

I'm planning to do the same in our shorty, I'll post pics when I get to making it.
Author:  zookedup [ Mon Feb 15, 2010 4:21 am ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
hey mate great job on the draw system and fridge slide looks tops, sorry for a bit of a dumb Q but what lift are you running and what tyre size? as that first pic gave me some inspiration for my vit.
cheers sam
Author:  royce [ Mon Feb 15, 2010 12:17 pm ]
Post subject:  Re: Rear Drawers and Fridge Slide SWB Vitara
235/75 tyres, lift I dont know, had a few different combos in it ive lost track :)
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/