auszookers.com :: View topic

I am having a problem with my PM folder.

I get a sql error when I try and open it.

I tried to send the error message through to the listed address but it bounced.

I don't think I have done anything recently to be banned again

Fixed it, by a friggen miracle too

Wooo all good! 3 cheers for Royce

royce wrote:

Fixed it, by a friggen miracle too

are you Jesus?

atari4x4 wrote:

royce wrote:

Fixed it, by a friggen miracle too

are you Jesus?

I tell you what there must of been some intervention

So the story goes

To fix it you have to delete shit from /tmp cause something stuffs up and it fills up (fix it one day)
I cant do that at work cause I cant have the program (like ftp) on my work laptop
but I had remembered that lately when I open my own laptop up at home it hasnt hibernated, just turned the screen off
So using my ANDROID phone, I tried to VNC to my home laptop and it hadn't hibernated so I could get in Armsup

ran the program from there and deleted it, I am still a bit amazed

That's pretty impressive. Nice work.

Figured out what else you can hack like that yet?

im having issues with trying to reply to a pm, this pops up:

General Error
SQL ERROR [ mysqli ]

Got error 28 from storage engine [1030]

An SQL error occurred while fetching this page. Please contact the Board Administrator if this problem persists.

not sure what i need to do to get rid of it, or if i can do anything?

yup.

new one.........I'm sure this is a phpBB thing, but whats with the..... "Your message contains 4 characters. The minimum number of characters you need to enter is 5." thing?

A response with 'Yes.' or 'No.' is not allowed?

Correct, since when have you ever been short of things to say

I have tried to send a PM using the box at the bottom of a post but it goes on to make a new post in the thread. Is there something wrong here or have the mods just discovered I'm a dickhead?

Bucketload wrote:

I have tried to send a PM using the box at the bottom of a post but it goes on to make a new post in the thread. Is there something wrong here or have the mods just discovered I'm a dickhead?

Try clicking the 'PM' button under the sig of the person you want to contact.

The box at the bottom of the page is a quick reply box. :wink:

Not working for me either.

Author:	ball [ Fri Mar 09, 2012 4:16 pm ]
Post subject:	PM Grief
I am having a problem with my PM folder. I get a sql error when I try and open it. I tried to send the error message through to the listed address but it bounced. I don't think I have done anything recently to be banned again

Author:	royce [ Fri Mar 09, 2012 4:21 pm ]
Post subject:	Re: PM Grief
rubbish bin is full again, get ready for the crash

Author:	laurie [ Fri Mar 09, 2012 4:23 pm ]
Post subject:	Re: PM Grief
ball wrote: I am having a problem with my PM folder. I get a sql error when I try and open it. I tried to send the error message through to the listed address but it bounced. I don't think I have done anything recently to be banned again ditto

Author:	abclarke [ Fri Mar 09, 2012 4:27 pm ]
Post subject:	Re: PM Grief
Same here

Author:	royce [ Fri Mar 09, 2012 4:31 pm ]
Post subject:	Re: PM Grief
Fixed it, by a friggen miracle too

auszookers.com http://auszookers.com/forum/

PM Grief http://auszookers.com/forum/viewtopic.php?f=16&t=31058	Page 1 of 3

Author:	abclarke [ Fri Mar 09, 2012 4:38 pm ]
Post subject:	Re: PM Grief
Wooo all good! 3 cheers for Royce

Author:	atari4x4 [ Fri Mar 09, 2012 4:46 pm ]
Post subject:	Re: PM Grief
royce wrote: Fixed it, by a friggen miracle too are you Jesus?

Author:	laurie [ Fri Mar 09, 2012 4:47 pm ]
Post subject:	Re: PM Grief
abclarke wrote: Wooo all good! 3 cheers for Royce ditto

Author:	ball [ Fri Mar 09, 2012 5:09 pm ]
Post subject:	Re: PM Grief
All good again. You should do this for a job a Royce.

Author:	royce [ Fri Mar 09, 2012 7:50 pm ]
Post subject:	Re: PM Grief
atari4x4 wrote: royce wrote: Fixed it, by a friggen miracle too are you Jesus? I tell you what there must of been some intervention So the story goes To fix it you have to delete shit from /tmp cause something stuffs up and it fills up (fix it one day) I cant do that at work cause I cant have the program (like ftp) on my work laptop but I had remembered that lately when I open my own laptop up at home it hasnt hibernated, just turned the screen off So using my ANDROID phone, I tried to VNC to my home laptop and it hadn't hibernated so I could get in ran the program from there and deleted it, I am still a bit amazed

Author:	monley [ Fri Mar 09, 2012 9:05 pm ]
Post subject:	Re: PM Grief
royce wrote: atari4x4 wrote: royce wrote: Fixed it, by a friggen miracle too are you Jesus? I tell you what there must of been some intervention So the story goes To fix it you have to delete shit from /tmp cause something stuffs up and it fills up (fix it one day) I cant do that at work cause I cant have the program (like ftp) on my work laptop but I had remembered that lately when I open my own laptop up at home it hasnt hibernated, just turned the screen off So using my ANDROID phone, I tried to VNC to my home laptop and it hadn't hibernated so I could get in ran the program from there and deleted it, I am still a bit amazed ANDROID phone's Would you of been able to do that with a i-fail?

Author:	royce [ Fri Mar 09, 2012 9:09 pm ]
Post subject:	Re: PM Grief
dunno, I assume ipeople would only want to talk to their macthingy so maybe there is some special handshake program for that and they dont use vnc

Author:	DarkHorse [ Fri Mar 09, 2012 9:13 pm ]
Post subject:	Re: PM Grief
That's pretty impressive. Nice work. Figured out what else you can hack like that yet?

Author:	ball [ Fri Mar 09, 2012 9:23 pm ]
Post subject:	Re: PM Grief
DarkHorse wrote: That's pretty impressive. Nice work. Figured out what else you can hack like that yet? I think Royce might be practising for a job interview with this lot. They seem to be down a few members at the moment. http://gizmodo.com/5890825/lulzsec-lead ... -anonymous

Author:	shandy92 [ Sun Mar 11, 2012 1:58 pm ]
Post subject:	Re: PM Grief
steve wrote: working now? yeah thanks mate

Author:	royce [ Sun Feb 03, 2013 11:21 pm ]
Post subject:	Re: PM Grief
yeah same problem, something is fucked again trying to get in, wont let me though

Page 1 of 3	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	shandy92 [ Sun Mar 11, 2012 10:02 am ]
Post subject:	Re: PM Grief
im having issues with trying to reply to a pm, this pops up: General Error SQL ERROR [ mysqli ] Got error 28 from storage engine [1030] An SQL error occurred while fetching this page. Please contact the Board Administrator if this problem persists. not sure what i need to do to get rid of it, or if i can do anything?

Author:	Fatzook [ Sun Mar 11, 2012 10:19 am ]
Post subject:	Re: PM Grief
shandy92 wrote: im having issues with trying to reply to a pm, this pops up: General Error SQL ERROR [ mysqli ] Got error 28 from storage engine [1030] An SQL error occurred while fetching this page. Please contact the Board Administrator if this problem persists. not sure what i need to do to get rid of it, or if i can do anything? x2

Author:	steve [ Sun Mar 11, 2012 10:48 am ]
Post subject:	Re: PM Grief
working now?

Author:	Fatzook [ Mon Mar 12, 2012 8:51 am ]
Post subject:	Re: PM Grief
yup. new one.........I'm sure this is a phpBB thing, but whats with the..... "Your message contains 4 characters. The minimum number of characters you need to enter is 5." thing? A response with 'Yes.' or 'No.' is not allowed?

Author:	royce [ Mon Mar 12, 2012 9:05 am ]
Post subject:	Re: PM Grief
Correct, since when have you ever been short of things to say

Author:	Scrawny [ Mon Mar 12, 2012 12:13 pm ]
Post subject:	Re: PM Grief
Fatzook wrote: yup. new one.........I'm sure this is a phpBB thing, but whats with the..... "Your message contains 4 characters. The minimum number of characters you need to enter is 5." thing? A response with 'Yes.' or 'No.' is not allowed? Just use one of these too

Author:	Fatzook [ Mon Mar 12, 2012 10:41 pm ]
Post subject:	Re: PM Grief
royce wrote: Correct, since when have you ever been short of things to say Since I had to start buying my own vowels.

Author:	alien [ Mon Mar 12, 2012 11:46 pm ]
Post subject:	Re: PM Grief
gwagen never gets that error message =)

Author:	Bucketload [ Wed Jul 11, 2012 12:17 am ]
Post subject:	Re: PM Grief
I have tried to send a PM using the box at the bottom of a post but it goes on to make a new post in the thread. Is there something wrong here or have the mods just discovered I'm a dickhead?

Author:	Fatzook [ Wed Jul 11, 2012 1:03 am ]
Post subject:	Re: PM Grief
Bucketload wrote: I have tried to send a PM using the box at the bottom of a post but it goes on to make a new post in the thread. Is there something wrong here or have the mods just discovered I'm a dickhead? Try clicking the 'PM' button under the sig of the person you want to contact. The box at the bottom of the page is a quick reply box.

Author:	boostedbrick [ Fri Jul 13, 2012 9:51 pm ]
Post subject:	Re: PM Grief
Fatzook wrote: Bucketload wrote: I have tried to send a PM using the box at the bottom of a post but it goes on to make a new post in the thread. Is there something wrong here or have the mods just discovered I'm a dickhead? Try clicking the 'PM' button under the sig of the person you want to contact. The box at the bottom of the page is a quick reply box. If you click the PM button under the post, it will quote the post in your PM and may appear as though your still in the thread...

Author:	shandy92 [ Sun Feb 03, 2013 11:11 pm ]
Post subject:	Re: PM Grief
shandy92 wrote: im having issues with trying to reply to a pm, this pops up: General Error SQL ERROR [ mysqli ] Got error 28 from storage engine [1030] An SQL error occurred while fetching this page. Please contact the Board Administrator if this problem persists. not sure what i need to do to get rid of it, or if i can do anything? Just had this happen to me again! cant email where it says to as it bounces (noreply@auszookers.com). I Send an email to royce. anyone else???

Author:	Fatzook [ Sun Feb 03, 2013 11:20 pm ]
Post subject:	Re: PM Grief
Not working for me either.

Author:	shandy92 [ Sun Feb 03, 2013 11:21 pm ]
Post subject:	Re: PM Grief
Fatzook wrote: Not working for me either. ok, bin must be full again.