| auszookers.com http://auszookers.com/forum/ |
|
| G16b into Sierra modplate ??? http://auszookers.com/forum/viewtopic.php?f=37&t=31804 |
Page 1 of 1 |
| Author: | reeceh [ Thu Apr 12, 2012 8:53 pm ] |
| Post subject: | G16b into Sierra modplate ??? |
Sierra is almost ready for modplate. I used the long range off road adapter kit to fit the g16b mpfi into my zook. External fuel pump etc. what else is required for the engine upgrade modplate?? |
|
| Author: | DMAC [ Fri Apr 13, 2012 9:15 am ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
When I did mine with exactly the same specs as yours I got 3 modifications listed on the plate. 1. Engine Capacity 2. Gearbox. Apparently thats for the adaptor plate. 3. EFI Conversion. Cost $100 bucks for each listed modification. Ie. $300 all up. |
|
| Author: | JrZook [ Fri Apr 13, 2012 10:10 am ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
That's steep as DMAC! My engineer looked at the whole conversion as a package. Engine conversion listed on the plate $100 |
|
| Author: | reeceh [ Fri Apr 13, 2012 10:15 am ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
Sweet so you don't have to do brake upgrades for the conversion? I plan on doing them in the future. Just for modplate though do u need them?? |
|
| Author: | JrZook [ Fri Apr 13, 2012 11:14 am ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
To G16 no brake upgrades required |
|
| Author: | reeceh [ Fri Apr 13, 2012 1:39 pm ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
Wicked thanks mate. Did you get yours done in Brisbane?? |
|
| Author: | JrZook [ Fri Apr 13, 2012 7:32 pm ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
Don't have a lead for brizzy mate. Mine got done in FNQ by Lindsey. Very reputable bloke. |
|
| Author: | reeceh [ Fri Apr 13, 2012 8:01 pm ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
No wuckas! Thanks mate. |
|
| Author: | jim_dover [ Sun Apr 15, 2012 5:35 pm ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
Mustang Sally conversion +61405192640. Nice bloke he did mine mod plate for a g16 and seat removal $130 for both and he'll come to you. |
|
| Author: | reeceh [ Mon Apr 16, 2012 4:59 pm ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
Thanks champ!! |
|
| Author: | xedent [ Sun Apr 29, 2012 1:59 pm ] |
| Post subject: | Re: G16b into Sierra modplate ??? |
Yeah I got mine engine conversion and seats done cost $200 for both. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|