auszookers.com
http://auszookers.com/forum/

Tailshaft question
http://auszookers.com/forum/viewtopic.php?f=37&t=35185
Page 1 of 1

Author:  Veggiesoup [ Thu Aug 23, 2012 9:50 am ]
Post subject:  Tailshaft question

Anybody know a decent not super dodgey ways of lengthening a tailshaft without hitting up a shop? Ive got a 88 tara :)

Author:  atari4x4 [ Thu Aug 23, 2012 9:52 am ]
Post subject:  Re: Tailshaft question

pretty sure they call them a tail shaft spacer :wink:

how much longer do you need it to be?

Author:  Veggiesoup [ Thu Aug 23, 2012 9:56 am ]
Post subject:  Re: Tailshaft question

I did a 2" body lift, probably about a inch or abit more to get it home

Author:  tanshi [ Thu Aug 23, 2012 9:57 am ]
Post subject:  Re: Tailshaft question

you dont need to lengthen a tail shaft for a body lift

Author:  atari4x4 [ Thu Aug 23, 2012 10:02 am ]
Post subject:  Re: Tailshaft question

tanshi wrote:
you dont need to lengthen a tail shaft for a body lift


+1


it's a slip yoke on the end of the gearbox, are you running any sort of suspension lift?

Author:  Veggiesoup [ Thu Aug 23, 2012 10:04 am ]
Post subject:  Re: Tailshaft question

My bad 2 inch Susp lift, sorry

Author:  Veggiesoup [ Thu Aug 23, 2012 12:30 pm ]
Post subject:  Re: Tailshaft question

Where would I get there spacers from?

Author:  tanshi [ Thu Aug 23, 2012 12:35 pm ]
Post subject:  Re: Tailshaft question

lowrange offroad, acme adapters, they are the same as WT sierra ones

Author:  atari4x4 [ Thu Aug 23, 2012 12:48 pm ]
Post subject:  Re: Tailshaft question

bits4vits

you'd only need a 1/2 spacer at the most, if any. how much of the slip yoke is showing?

pics. :wink:

Author:  Veggiesoup [ Thu Aug 23, 2012 4:05 pm ]
Post subject:  Re: Tailshaft question

Can't do photos on my phone to big haha, but about 10mm, how much play do they have to absorb in and out these slip yokes?

Author:  atari4x4 [ Thu Aug 23, 2012 4:23 pm ]
Post subject:  Re: Tailshaft question

www.photobucket.com

Author:  Bruce [ Thu Aug 23, 2012 4:49 pm ]
Post subject:  Re: Tailshaft question

10 sec work
http://www.ebay.com.au/itm/Rockhopper-S ... 20b9438c58

Author:  Veggiesoup [ Fri Aug 24, 2012 3:16 pm ]
Post subject:  Re: Tailshaft question

http://m1251.photobucket.com/albumview/ ... g.html?o=0 there she is that spacer would do the trick I reckon, do the Sierra ones fit vitaras aswell? I'm assuming it's pretty universal looking at all thre holes

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/