| auszookers.com http://auszookers.com/forum/ |
|
| Will 92 SWB Vitara bits fit a 96 SWB http://auszookers.com/forum/viewtopic.php?f=37&t=35835 |
Page 1 of 1 |
| Author: | krat [ Wed Sep 19, 2012 8:44 am ] |
| Post subject: | Will 92 SWB Vitara bits fit a 96 SWB |
To be more specific, will the front seats swap from one to another. Is there any difference between those for an auto or manual version. Secondly, are the soft tops interchangeable between these models. Looking to pick up some spares, but need to know if they will fit. While I'm at it , will the rear tailgate (door) also fit. Thanks' Kev. |
|
| Author: | Gwagensteve [ Wed Sep 19, 2012 8:59 am ] |
| Post subject: | Re: Will 92 SWB Vitara bits fit a 96 SWB |
Yes on all counts as far as I know. Steve |
|
| Author: | krat [ Thu Sep 20, 2012 9:10 am ] |
| Post subject: | Re: Will 92 SWB Vitara bits fit a 96 SWB |
Thanks Steve, your quick response and input is appreciated. Kev. |
|
| Author: | krat [ Thu Oct 11, 2012 1:38 pm ] |
| Post subject: | Re: Will 92 SWB Vitara bits fit a 96 SWB |
Sorry, but I need some more info. Am I going to create any electrical issues by replacing a JLX door with a JX door e.g. auto locking, window winding and mirror adjustments. Can I get around these issues by just terminating the wiring. Thanks, Kev. |
|
| Author: | Gwagensteve [ Thu Oct 11, 2012 4:05 pm ] |
| Post subject: | Re: Will 92 SWB Vitara bits fit a 96 SWB |
Yes you can, and no it won't create any issues, but you're going to hate the inconvenience. Why not just swap the JLX guts into the JX door? The pressings will be the same, so it's just s remove and replace job IMHO. Steve. |
|
| Author: | krat [ Fri Oct 12, 2012 9:26 am ] |
| Post subject: | Re: Will 92 SWB Vitara bits fit a 96 SWB |
What a great solution. It sounds too easy. Thanks again Steve. Kev. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|