| auszookers.com http://auszookers.com/forum/ |
|
| Calibrating speedo http://auszookers.com/forum/viewtopic.php?f=37&t=36868 |
Page 1 of 1 |
| Author: | KEENSY85 [ Sun Nov 04, 2012 2:07 pm ] |
| Post subject: | Calibrating speedo |
Is there any way of calibrating a suzuki Sierra's speedo |
|
| Author: | stockman [ Sun Nov 04, 2012 2:22 pm ] |
| Post subject: | Re: Calibrating speedo |
Yes. But not the odo. It was recently discussed so should come up with a search. |
|
| Author: | KEENSY85 [ Sun Nov 04, 2012 2:41 pm ] |
| Post subject: | Re: Calibrating speedo |
Thanks |
|
| Author: | DarkHorse [ Sun Nov 04, 2012 3:32 pm ] |
| Post subject: | Re: Calibrating speedo |
You can spend lots of money on a little gearbox on the speedo output, which will fix both. I had to do it to get my 31s engineered. About $500 from memory. |
|
| Author: | KEENSY85 [ Sun Nov 04, 2012 3:47 pm ] |
| Post subject: | Re: Calibrating speedo |
DarkHorse wrote: You can spend lots of money on a little gearbox on the speedo output, which will fix both. I had to do it to get my 31s engineered. About $500 from memory. Thank u I will check that out $500 is way to pricy I will prolly just operate on the speedo,I've got to just search what's said on auszookers |
|
| Author: | jono165 [ Sun Nov 04, 2012 3:52 pm ] |
| Post subject: | Re: Calibrating speedo |
The simplest option is just to buy a GPS unit. Marks4WD Adaptors in vic could do a ratio box for $300 when I asked them. It was a third of the price to buy a GPS. Unfortunately if your looking at getting the car engineered then a proper fix is the only option. |
|
| Author: | KEENSY85 [ Sun Nov 04, 2012 4:10 pm ] |
| Post subject: | Re: Calibrating speedo |
It seems in qld we don't have to get our tyr size engineered, we just don't have has many options for legalarty in larger tyres as other states |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|