| auszookers.com http://auszookers.com/forum/ |
|
| Fitting 2" lift to Sierra http://auszookers.com/forum/viewtopic.php?f=37&t=37080 |
Page 1 of 1 |
| Author: | 95zook [ Tue Nov 13, 2012 12:08 am ] |
| Post subject: | Fitting 2" lift to Sierra |
hey guy I finally bought my first zook 95 soft top zook today and I purchasing a 2" lift for it in a week or tow. I don't have much experience with zooks as such but I want to do the installation myself to get a better understanding of everything. Is it a relatively easy job? any do's and dont's I should know about? Any feedback would be appreciated. Cheers! |
|
| Author: | zukmeista [ Tue Nov 13, 2012 4:15 am ] |
| Post subject: | Re: 2" lift |
Easy job. Make sure you have some good jackstands, cars are much better when they aren't sitting on you. I would do one corner at a time, stops diff getting out of alignment. And replace the U-bolts as well. |
|
| Author: | 95zook [ Wed Nov 14, 2012 12:02 am ] |
| Post subject: | Re: 2" lift |
cheers mate, I guess it'll be easy to work out when im taking all the stock stuff off anyway hey |
|
| Author: | 95zook [ Wed Nov 14, 2012 12:02 am ] |
| Post subject: | Re: 2" lift |
cheers mate, I guess it'll be easy to work out when im taking all the stock stuff off anyway hey |
|
| Author: | zukmeista [ Wed Nov 14, 2012 4:05 am ] |
| Post subject: | Re: 2" lift |
Pretty much, just put it back in reverse order. I found the easiest way is to jack up the chassis until the wheels are off the ground, undo the U-bolts, then jack up the diff off the springs, and when you're putting it back put the springs in first then drop the diff ontop. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|