Ahhh yes. Dunno what I was thinking. We can't all be right all the time
| auszookers.com http://auszookers.com/forum/ |
|
| what size nuts fit these studs? http://auszookers.com/forum/viewtopic.php?f=37&t=42645 |
Page 1 of 1 |
| Author: | coily96 [ Mon Aug 26, 2013 2:37 pm ] |
| Post subject: | what size nuts fit these studs? |
On a 1l transfer im missing the four nuts that hold the flange on. |
|
| Author: | Bugsta [ Mon Aug 26, 2013 2:47 pm ] |
| Post subject: | Re: what size nuts fit these studs? |
Use a set of Vernier calipers, or failing that a ruler for the diameter. I'd guess M10x1.25 (Same as wheel studs) |
|
| Author: | monley [ Mon Aug 26, 2013 2:50 pm ] |
| Post subject: | Re: what size nuts fit these studs? |
M8x1.25 |
|
| Author: | tanshi [ Mon Aug 26, 2013 2:56 pm ] |
| Post subject: | Re: what size nuts fit these studs? |
since when did wheel studs shrink to M10? those ones are M8x1.25 as monley said Wheel studs are M12 |
|
| Author: | coily96 [ Mon Aug 26, 2013 4:40 pm ] |
| Post subject: | Re: what size nuts fit these studs? |
Thanks heaps, yeh their kinda small for flange bolts. |
|
| Author: | coily96 [ Mon Aug 26, 2013 7:11 pm ] |
| Post subject: | Re: what size nuts fit these studs? |
Would the bolts for the other two front flanges be the same. It seems the wt and coily bolts are M10x1.25 and wont fit into the NT flanges |
|
| Author: | zooky08 [ Mon Aug 26, 2013 7:19 pm ] |
| Post subject: | Re: what size nuts fit these studs? |
Yes theyll be the same. Wt are m10 and nt are m8 |
|
| Author: | mnemonix [ Mon Aug 26, 2013 7:21 pm ] |
| Post subject: | Re: what size nuts fit these studs? |
Yes,1.0/maruti both use m8x1.25 for diff/transfer flanges and transfer handbrake drum. If it's a switched 1.0 transfer, Later flanges off a 1.3 sierra can be swapped if you need the upgraded M10 bolts and wider PCD for some reason. |
|
| Author: | coily96 [ Tue Aug 27, 2013 5:34 am ] |
| Post subject: | Re: what size nuts fit these studs? |
Thanks again |
|
| Author: | Bugsta [ Tue Aug 27, 2013 8:00 am ] |
| Post subject: | Re: what size nuts fit these studs? |
Ahhh yes. Dunno what I was thinking. We can't all be right all the time
|
|
| Author: | coily96 [ Tue Aug 27, 2013 11:12 am ] |
| Post subject: | Re: what size nuts fit these studs? |
Ive also noticed the coily transfer that came out had threaded flanges for the bolts to do up. The 1l one has no thead and needs a bolt and nut to join the drive shafts to the flanges. |
|
| Author: | tanshi [ Tue Aug 27, 2013 11:42 am ] |
| Post subject: | Re: what size nuts fit these studs? |
correct. LJs have 1litre sized bolts but flanges are all threaded |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|