auszookers.com http://auszookers.com/forum/
Removing Stud from Drum http://auszookers.com/forum/viewtopic.php?f=37&t=42785	Page 1 of 1

---

Author:	matth27 [ Tue Sep 03, 2013 8:03 pm ]
Post subject:	Removing Stud from Drum
Trying to remove my rear drums and one of the splines is stripped and the stud just keeps spinning. Any ideas on how to undo it?

---

Author:	pezz [ Tue Sep 03, 2013 8:07 pm ]
Post subject:	Re: Removing Stud from Drum
cold chisel is one option

---

Author:	buzbox [ Tue Sep 03, 2013 8:29 pm ]
Post subject:	Re: Removing Stud from Drum
Hit with a hammer to remove the stud, and replace it

---

Author:	pezz [ Tue Sep 03, 2013 8:31 pm ]
Post subject:	Re: Removing Stud from Drum
think he means the nut is still on the stud

---

Author:	jono165 [ Tue Sep 03, 2013 8:42 pm ]
Post subject:	Re: Removing Stud from Drum
I'd just cut the nut off and replace the stud. If the hole in the axles is stuffed from the stud spinning i'd just source a 2nd hand axle.

---

Author:	buzbox [ Wed Sep 04, 2013 6:59 am ]
Post subject:	Re: Removing Stud from Drum
Well that's a bit more of a complex operation then. Angle grinder to chop it off.... Then hammer

---

Author:	cairns27 [ Wed Sep 04, 2013 7:15 pm ]
Post subject:	Re: Removing Stud from Drum
More complex that what? bye

---

Author:	atari4x4 [ Wed Sep 04, 2013 7:24 pm ]
Post subject:	Re: Removing Stud from Drum
Hi what bit don't you get? pretty sure he means it's not as simple as knocking out the old stud as mentioned in an earlier post of his & if the nut is still on & it's spinning the knurled section on the stud or the wheel nut is stripped it will need to be cut off. Bye

---

Author:	buzbox [ Thu Sep 05, 2013 12:54 am ]
Post subject:	Re: Removing Stud from Drum
An explanation of an explanation, now that's deep. Thanks Atari , your like a miniature Buddha

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/