| auszookers.com http://auszookers.com/forum/ |
|
| heavy duty clutch or standard clutch what is better http://auszookers.com/forum/viewtopic.php?f=37&t=43141 |
Page 1 of 1 |
| Author: | killazook [ Wed Sep 25, 2013 5:23 pm ] |
| Post subject: | heavy duty clutch or standard clutch what is better |
Hi everyone I was just reading some threads and now I am not sure about what to buy I am going to run 31" tyres and 4.9:1 transfer case gears and so what do you guys recommend to buy and funds are not the issue. I am wondering in terms of clutch slippage and long life and how the clutch cable will handle the hd clutch thanks for your help |
|
| Author: | Reubs [ Wed Sep 25, 2013 5:31 pm ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
A Sierra doesn't need a HD clutch. A Sierra with reduction gears needs one even less. A Sierra with reduction gears and a driver with mechanical sympathy doesn't need one at all. Also - old clutch cables die eventually regardless of whether fitting a HD clutch or not so best to get a new cable when replacing the clutch. |
|
| Author: | want33s [ Wed Sep 25, 2013 5:42 pm ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
/\ Exactly. |
|
| Author: | Gwagensteve [ Wed Sep 25, 2013 5:54 pm ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
^exactly exactly. Steve. |
|
| Author: | killazook [ Wed Sep 25, 2013 6:11 pm ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
Thanks heaps for clearing that up for me I think I might stick to a normal clutch and while I am thinking about it do I need offset rims to run 31s on a 2" lift and 2" body lift |
|
| Author: | want33s [ Wed Sep 25, 2013 6:22 pm ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
31's on a Sierra? I know this is the noob section but have you tried search.php |
|
| Author: | killazook [ Wed Sep 25, 2013 9:27 pm ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
No sorry I haven't but will know |
|
| Author: | Bugsta [ Thu Sep 26, 2013 6:24 am ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
NPC clutches claim that they can build a HD Exedy clutch with 25% more clamping force with little extra pedal pressure. I have to agree with this. With stock gearing and 29's, my clutch would stink after anything more than a mild take off through the gears. The exedy smells only under extreme punishment. I am very happy with it and happy I went this way. 2009 Jimny |
|
| Author: | Mike_B [ Sun Sep 29, 2013 8:11 am ] |
| Post subject: | Re: heavy duty clutch or standard clutch what is better |
I replaced my standard clutch in my Vit (and rear main seal) at about 185xxxkm when I was getting gearbox rebuilt. Not sure if it was original clutch but hardly worn at all. Put a standard Exedy in and it works good so far. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|