| auszookers.com http://auszookers.com/forum/ |
|
| valve clearance http://auszookers.com/forum/viewtopic.php?f=37&t=44495 |
Page 1 of 1 |
| Author: | foolishme83 [ Thu Jan 02, 2014 5:33 pm ] |
| Post subject: | valve clearance |
Hi Guys I'm about to adjust my valve clearances on my g13ba and just read the service manual. Doing them cold is easy enough but how am I suppose to do them while the engine is hot?. Also i've read else where that if i dont have any feeler gauges I could use an old credit card? Cheers |
|
| Author: | droverdave [ Thu Jan 02, 2014 5:37 pm ] |
| Post subject: | Re: valve clearance |
Get proper feels gauges...... To do them hot you just do it after you have driven it. It's a pain but it's where they should be adjusted as that is the temp that the engine is at normal operating conditions. |
|
| Author: | foolishme83 [ Thu Jan 02, 2014 5:43 pm ] |
| Post subject: | Re: valve clearance |
so when i adjust them cold its just to get the motor running? I have a tappety tap sound coming out of my rocker cover , would that be the valve clearances? |
|
| Author: | droverdave [ Thu Jan 02, 2014 6:19 pm ] |
| Post subject: | Re: valve clearance |
Yer just to get it running, don't expect there to be a big difference when you do them hot. Could be the noise, worth checking either way. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|