| auszookers.com http://auszookers.com/forum/ |
|
| 1991 Vitara rotor removal http://auszookers.com/forum/viewtopic.php?f=37&t=44820 |
Page 1 of 1 |
| Author: | camskea [ Fri Jan 24, 2014 10:43 am ] |
| Post subject: | 1991 Vitara rotor removal |
Hi... Im stuck in the garage with my car on stands. 1st thing to go wrong was G16B brake pads.. I have a G16A. Look in the FS section if you'd like some new Bendix pads.  so I thought id change the rotors instead, wheel off caliper off, cant get the rotor off. Did some google ing and I thought they were a floating rotor that would come off with some persuasion froma rubber mallet but im getting nowhere.... Any tricks to this? Thanks |
|
| Author: | camskea [ Fri Jan 24, 2014 11:44 am ] |
| Post subject: | Re: 1991 Vitara rotor removal |
Ok. got it. got agro with the crow bar |
|
| Author: | jono165 [ Sat Jan 25, 2014 7:49 am ] |
| Post subject: | Re: 1991 Vitara rotor removal |
There's 2 M8 holes threaded into the rotor so you can wind a bolt in to remove the rotor from the hub. |
|
| Author: | damagera [ Sat Jan 25, 2014 10:00 am ] |
| Post subject: | Re: 1991 Vitara rotor removal |
LOL jono tooooooooooooooooooooooooooooooooooooooooooo late now |
|
| Author: | jono165 [ Sat Jan 25, 2014 11:40 am ] |
| Post subject: | Re: 1991 Vitara rotor removal |
I realised that when I posted. But maybe the next person who has trouble does a search and finds out the correct way |
|
| Author: | camskea [ Wed Jan 29, 2014 11:16 am ] |
| Post subject: | Re: 1991 Vitara rotor removal |
Yeah I looked at those holes and there was nothing in them. It appeared they'd just been on there a while and didn't want to leave. I just tapped them out with the rounded end of the crow bar from under the car, probably not quite as bad as it first sounded. Lol. thanks guys |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|