trying to adjust my TD panhards,any tips ,can't seem to get it right in centre ,
| auszookers.com http://auszookers.com/forum/ |
|
| jimny panhards http://auszookers.com/forum/viewtopic.php?f=37&t=46515 |
Page 1 of 1 |
| Author: | sur5a [ Tue Jun 03, 2014 5:47 pm ] |
| Post subject: | jimny panhards |
trying to adjust my TD panhards,any tips ,can't seem to get it right in centre ,
|
|
| Author: | fordem [ Tue Jun 03, 2014 10:41 pm ] |
| Post subject: | Re: jimny panhards |
With a panhard rod, the location of the axle will change as the ride height changes - you'll only be able to center it at one particular height - the change can be minimized by having the panhard rod horizontal with the vehicle in it's normal loaded condition, but, the greater the angle that the rod sits at, the greater the sideways movement. |
|
| Author: | sur5a [ Tue Jun 03, 2014 11:20 pm ] |
| Post subject: | Re: jimny panhards |
fordem wrote: With a panhard rod, the location of the axle will change as the ride height changes - you'll only be able to center it at one particular height - the change can be minimized by having the panhard rod horizontal with the vehicle in it's normal loaded condition, but, the greater the angle that the rod sits at, the greater the sideways movement. Thanks fordem |
|
| Author: | Dan85 [ Mon Jun 09, 2014 6:56 am ] |
| Post subject: | Re: jimny panhards |
I thought I would just use this thread instead of starting another. I have just installed my td panhards with a very rough adjustment as is going in for an alignment rotate and balance so figured they could do the whole lot at once. My problem is that my steering wheel is now about 45 degrees off centre. Will this recentre once it's aligned correctly? |
|
| Author: | Skippy [ Mon Jun 09, 2014 7:36 am ] |
| Post subject: | Re: jimny panhards |
Yea when they do the alignment Dan they will fix it, my panhard moved a fair bit once and threw the wheel out about the same |
|
| Author: | Dan85 [ Mon Jun 09, 2014 1:19 pm ] |
| Post subject: | Re: jimny panhards |
Sweet thanks skippy. I thought it would be the case but still thought I'd ask |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|