Okay so I put Power Steering on my Sierra from a suzuki Vitara, first trip out it blew the high pressure hose, so I replaced the hoses $200 later
the hose blew at the start of a 4wding day so I took the belt off and keeper driving. After reassembling it and turned the key it started posing out of the bottom of the box ( probably from running dry ) so I replaced it also and whilst at LCMP the same seal ( the one at the bottom of the steering box keeps dislodging itself and leaking , this wasn't the first time out with the new seal in. So why would it keep pushing the seal out? Thanks in advance.