| auszookers.com http://auszookers.com/forum/ |
|
| Bull Bar Help http://auszookers.com/forum/viewtopic.php?f=37&t=46778 |
Page 1 of 1 |
| Author: | MISSN2 [ Fri Jun 27, 2014 9:18 pm ] |
| Post subject: | Bull Bar Help |
Hi guys Im looking for a Bull Bar for my Jimny its a 2000 model. The ARb bar says it does 1998 TO 2012 and then I look at the Xrox bar and it says 2005 to 2012? I was wondering if there is a reason why the Xrox one won't fit my 2000 model? Can anyone give me some information on why this is. Also which bar would you guys recommend. I will be getting a winch and most likely fitting 235's. |
|
| Author: | pezz [ Fri Jun 27, 2014 11:03 pm ] |
| Post subject: | Re: Bull Bar Help |
purely due to the look of it i would avoid the xrox bar.. in my eyes it doesnt suit the jimny very well id be looking at the arb or uneek4x4 bar |
|
| Author: | MISSN2 [ Thu Jul 03, 2014 6:18 pm ] |
| Post subject: | Re: Bull Bar Help |
So I ended up picking up a 2nd hand arb bar. Now I just have to work out how it bolts up. |
|
| Author: | atari4x4 [ Thu Jul 03, 2014 6:20 pm ] |
| Post subject: | Re: Bull Bar Help |
there are a few threads on fitting the arb bar to the various updates done over the years to the jimny, you might require a different set of brackets to suit your model. |
|
| Author: | tim80z [ Sat Jul 05, 2014 9:37 am ] |
| Post subject: | Re: Bull Bar Help |
This might help: viewtopic.php?f=5&t=22723 - Tim. |
|
| Author: | MISSN2 [ Sun Jul 20, 2014 9:59 pm ] |
| Post subject: | Re: Bull Bar Help |
Yep sure did all fitted now |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|