auszookers.com
http://auszookers.com/forum/

baleno non coil pack to jimny
http://auszookers.com/forum/viewtopic.php?f=37&t=47847		 Page 1 of 1
Author:  GraphicX [ Fri Sep 19, 2014 8:51 pm ]
Post subject:  baleno non coil pack to jimny
Sorry not being lazy, just on phone.

Is non coil pack 1997 baleno engine to jimny ok to do, say if use G13b head from jimny with coil packs etc or will it reduce power or not possible? Ask as have come across cheap baleno. Thanks for advice.
Author:  greyghost [ Fri Sep 19, 2014 9:34 pm ]
Post subject:  Re: baleno non coil pack to jimny
it'll work.
i've done it before. i used the baleno head, jimny cam and cam cover as well as all the jimny manifolds
Author:  GraphicX [ Sat Sep 20, 2014 6:30 pm ]
Post subject:  Re: baleno non coil pack to jimny
thanks for that, did you use the jimny coil packs as well ??
Author:  Gwagensteve [ Sat Sep 20, 2014 6:31 pm ]
Post subject:  Re: baleno non coil pack to jimny
Jimny and baleno coil packs are the same, but yes, you'd use everything except the short block from the Jimny.

Steve.
Author:  GraphicX [ Sat Sep 20, 2014 6:34 pm ]
Post subject:  Re: baleno non coil pack to jimny
here's what i mean about the coil packs being different, i'm guessing this is just a slightly different ignition set up (it's a 1997 baleno, asking $300):

Image
Author:  azzas15 [ Thu Sep 25, 2014 3:02 pm ]
Post subject:  baleno non coil pack to jimny
That engine has coil packs.

Cheers
Author:  GraphicX [ Thu Sep 25, 2014 4:30 pm ]
Post subject:  Re: baleno non coil pack to jimny
i thought the easier conversion was with the 2 coil packs on the rocker cover as the jimny has ? doesn't matter just now, the car sold in literally 2 days as you'd expect.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/