The arms on the out side of the chassis were to eliminate any anchor points
I'll knock some hub stops up next time I'm home
| auszookers.com http://auszookers.com/forum/ |
|
| Vitara steering box internal stops? http://auszookers.com/forum/viewtopic.php?f=37&t=48312 |
Page 1 of 1 |
| Author: | monley [ Mon Nov 03, 2014 3:51 pm ] |
| Post subject: | Vitara steering box internal stops? |
Noob question. Do vit p/s have internal stops that can be adjusted? |
|
| Author: | want33s [ Mon Nov 03, 2014 6:18 pm ] |
| Post subject: | Re: Vitara steering box internal stops? |
Internal stops....No. Can't say I've ever seen a steering box with adjustable internal stops. Vitara has steering stops on the pitman arm but they are more for limiting steering angle at the wheel than at the box. |
|
| Author: | monley [ Mon Nov 03, 2014 6:22 pm ] |
| Post subject: | Re: Vitara steering box internal stops? |
Thanks. Going to have to make something up then to reduce steering lock |
|
| Author: | want33s [ Mon Nov 03, 2014 6:32 pm ] |
| Post subject: | Re: Vitara steering box internal stops? |
Pitman arm or hub is easiest. What's the vehicle/setup? |
|
| Author: | monley [ Mon Nov 03, 2014 6:49 pm ] |
| Post subject: | Re: Vitara steering box internal stops? |
Hub stops might be the go Lwb tray back with 3-link front with the arms running on the out side of the chassis. Wt diffs, 33's on 8" rims |
|
| Author: | want33s [ Tue Nov 04, 2014 5:34 am ] |
| Post subject: | Re: Vitara steering box internal stops? |
Sounds cool. Arms outside chassis won't allow much if any triangulation though. Hub stops seem to be the industry solid axle standard. |
|
| Author: | monley [ Tue Nov 04, 2014 6:15 am ] |
| Post subject: | Re: Vitara steering box internal stops? |
The arms on the out side of the chassis were to eliminate any anchor points I'll knock some hub stops up next time I'm home |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|