| auszookers.com http://auszookers.com/forum/ |
|
| Sierra g16b imobiliser help http://auszookers.com/forum/viewtopic.php?f=37&t=49121 |
Page 1 of 1 |
| Author: | Ash_SJ50Zuk [ Mon Jan 26, 2015 7:56 pm ] |
| Post subject: | Sierra g16b imobiliser help |
Done some research after my previous post. Have come to the conclusion that my baleno has an immobiliser. Anyone done the conversion and been able to keep/bypass the immobiliser. Othwise im wondering will i have to get a pcm and harness from a baleno without an immobiliser? Any ideas. Thanks. |
|
| Author: | Rhinoman [ Sun Feb 01, 2015 6:26 am ] |
| Post subject: | Re: Sierra g16b imobiliser help |
You would need to source an ECU from a non-immo model, there are just a few wires to swap around in the plug. |
|
| Author: | BlueSuzy [ Tue Feb 03, 2015 1:20 am ] |
| Post subject: | Re: Sierra g16b imobiliser help |
AU Models had an aftermarket immobiliser wired in. Black box with dodgy wires. From memory i deleted all the non suzuki coloured wires solid weird green etc, And joined the suzuki black/yellowstripe?? If you trace the immobiliser wires, they won't go far anyway. Have done 2 conversions and another i have pulled out of a car has the same shiz going on. |
|
| Author: | mike86 [ Sun Aug 28, 2016 2:59 pm ] |
| Post subject: | Re: Sierra g16b imobiliser help |
Sorry to bring this thread back from the dead but what was the outcome. I'm in the same boat right now. I've got a 2000 Baleno with an immobiliser. Is it possible to use this harness and ECU ? |
|
| Author: | MrRocky [ Sun Aug 28, 2016 7:57 pm ] |
| Post subject: | Re: Sierra g16b imobiliser help |
Yes it is possible |
|
| Author: | BlueSuzy [ Mon Aug 29, 2016 3:53 pm ] |
| Post subject: | Re: Sierra g16b imobiliser help |
Yep, Read my post. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|