| auszookers.com http://auszookers.com/forum/ |
|
| Basic carby setup http://auszookers.com/forum/viewtopic.php?f=37&t=49607 |
Page 1 of 1 |
| Author: | slowsierra [ Fri Mar 20, 2015 2:34 pm ] |
| Post subject: | Basic carby setup |
I have a Sierra with a g13a. The carby has had a kit put through it and now won't stay running with out revs. Can someone explain how to set the cold and hot idle screws to roughly the right spot. Eg screw all the way in and back it off 2 turns ect |
|
| Author: | andrew [ Tue Mar 31, 2015 11:48 pm ] |
| Post subject: | Re: Basic carby setup |
I got the same problem. Ive pulled it down 3 times had a carb joint set all the screws and still cant get it to idle. Mines not registered Yet so I can't take it in on the car. Let me know if u solve it. Its doing my head in. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|