| auszookers.com http://auszookers.com/forum/ |
|
| GV 2.5 V6 Sump removal? http://auszookers.com/forum/viewtopic.php?f=37&t=49645 |
Page 1 of 1 |
| Author: | gregwatkins75 [ Wed Mar 25, 2015 7:12 pm ] |
| Post subject: | GV 2.5 V6 Sump removal? |
As per the title..do you have to pull the motor out to replace the sump gasket? |
|
| Author: | fordem [ Thu Mar 26, 2015 1:46 am ] |
| Post subject: | Re: GV 2.5 V6 Sump removal? |
The FSM suggests the sump can be removed without pulling the engine - the front diff & rack & pinion will need to be removed. Assuming that you're doing this because of a suspected leak - I suggest you be very certain that it is the gasket before starting - it's quite unusual for RTV FIP gasket to suddenly start leaking, and the H series engines have quite a reputation for oil running down from leaks higher up (possibly around the timing cover, the oil filter, and the oil pressure switch) and appearing to come from that area. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|