| auszookers.com http://auszookers.com/forum/ |
|
| engine conversion http://auszookers.com/forum/viewtopic.php?f=37&t=50087 |
Page 1 of 1 |
| Author: | teco [ Wed May 13, 2015 7:29 pm ] |
| Post subject: | engine conversion |
need help with coralla conversion please |
|
| Author: | BigRay [ Wed May 13, 2015 8:07 pm ] |
| Post subject: | Re: engine conversion |
A bit more info might be handy so people can help you... |
|
| Author: | J--A--C--K [ Thu May 14, 2015 6:34 pm ] |
| Post subject: | Re: engine conversion |
What exactly would you like to convert your corolla too? Or do you mean you want to make your corolla a convertible ? Or this a corolla some sort of currency I haven't heard of?? |
|
| Author: | fergy [ Fri May 15, 2015 1:52 am ] |
| Post subject: | Re: engine conversion |
No jack coralla it's a toyada coralla |
|
| Author: | madmacca [ Fri May 15, 2015 5:36 am ] |
| Post subject: | Re: engine conversion |
Convert it at cash converters then put the $$ down on a deposit for a Sierra ? if you are putting a corrolla engine in a sierra then what engine are you using ? K , T , 2T ,3K, etc etc etc bit like saying you want to want to buy some teal slacks |
|
| Author: | Marko_SJ [ Fri May 15, 2015 1:07 pm ] |
| Post subject: | Re: engine conversion |
madmacca wrote: Convert it at cash converters then put the $$ down on a deposit for a Sierra ? if you are putting a corrolla engine in a sierra then what engine are you using ? K , T , 2T ,3K, etc etc etc bit like saying you want to want to buy some teal slacks Anything after *E70 (apart from the sprinter) should have the engine removed and then converted at Sims. |
|
| Author: | Jezza86 [ Fri May 15, 2015 1:48 pm ] |
| Post subject: | Re: engine conversion |
eleteric conversions are easy. i have a 250Kw 2.6 tonne motor ready for ya. |
|
| Author: | teco [ Fri May 22, 2015 7:21 pm ] |
| Post subject: | Re: engine conversion |
sorry guys want to fit a corolla engine in a seiria |
|
| Author: | teco [ Fri May 22, 2015 7:25 pm ] |
| Post subject: | Re: engine conversion |
got access to 4k and 2t .and 2 or 3 others |
|
| Author: | jdk81 [ Fri May 22, 2015 8:45 pm ] |
| Post subject: | Re: engine conversion |
Is there a surplus of anchors? |
|
| Author: | Gwagensteve [ Sat May 23, 2015 9:18 am ] |
| Post subject: | Re: engine conversion |
tech, don't bother. Putting ancient corolla motors in sierras was fine in the early 80's, but it hasn't been a good idea since. They're heavy and the gearbox options don't work well in a Sierra. I've driven a sierra with a 5K in it, it was torquey but it was a nasty conversion - clearances were poor, the transfer had to be moved back, and It wasn't any better than a G16A, although at the time (about 1995) G16A conversions were almost unheard of. The biggest problem is it required an engineers certificate to re-register, so the car couldn't really ever be sold without spending a lot of money on it. Made a "cheap" conversion expensive. Steve. |
|
| Author: | HarryHoudini [ Sat May 23, 2015 10:14 am ] |
| Post subject: | Re: engine conversion |
There was a Sierra for sale with a Corolla Motor earlier this year(late last year?),i'm sure they had it mated to the Sierra G/box.I forget where i saw it but it was probaly Gumtree or Ebay. |
|
| Author: | Gwagensteve [ Sat May 23, 2015 10:19 am ] |
| Post subject: | Re: engine conversion |
I'm willing to bet it didn't, and it was just a poorly worded ad implying the sierra [i]transfer[i/] was used. I've never seen or heard of a corolla/sierra adapter plate. I agree it might be the better solution, but a better solution again is to avoid the pushrod/cast iron corolla motors altogether. Steve. |
|
| Author: | vet 180 [ Sat May 23, 2015 8:40 pm ] |
| Post subject: | Re: engine conversion |
it's a lot of work for a sideways step imo Unless one of the other toyota engines is the 22re so you can use the short 1st gear hilux gearbox it's not really worth it. Otherwise there are much better options these days for engine conversions. the 4age if you want a toyota engine springs to mind (lighter and more powerful than the 2T) and the obvious g16b |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|