auszookers.com
http://auszookers.com/forum/

Where do these vacuum hoses go? (g13a carb)
http://auszookers.com/forum/viewtopic.php?f=37&t=50351		 Page 1 of 1
Author:  jimmyjimny [ Tue Jun 16, 2015 11:54 pm ]
Post subject:  Where do these vacuum hoses go? (g13a carb)
Hey can anyone tell me what vacuum hoses go on these pipes? Particularly #1 I'm trying to put it back in the car but couldn't remember where the hoses go. #1 looked like a fuel line was supposed to hook up to it. Any help would be greatly appreciated! Cheers

Image
Author:  jimmyjimny [ Wed Jun 17, 2015 2:59 pm ]
Post subject:  Re: Where do these vacuum hoses go? (g13a carb)
does it run to the distributor cap? I thought it was a fuel line seems a pretty odd place to run, cheers
Author:  Bulldog 61 [ Wed Jun 17, 2015 5:13 pm ]
Post subject:  Re: Where do these vacuum hoses go? (g13a carb)
Pretty sure one goes to the distributor advance and the other to the carbon canister....thats how it is on my sons at least.
Author:  jimmyjimny [ Thu Jun 18, 2015 11:44 am ]
Post subject:  Re: Where do these vacuum hoses go? (g13a carb)
Hey cheers mate that gives me something to work with! Would you know which is which by any chance lol? Ill just try both ways when I go over to give it a run
Author:  Bulldog 61 [ Thu Jun 18, 2015 6:22 pm ]
Post subject:  Re: Where do these vacuum hoses go? (g13a carb)
it shouldnt make any difference i dont think, vacuum is vacuum
Author:  jimmyjimny [ Thu Jul 02, 2015 4:51 pm ]
Post subject:  Re: Where do these vacuum hoses go? (g13a carb)
Yeah mate she's running good atm, pretty sure I got the hoses right :D Cheers
Author:  Mickc [ Thu Jul 02, 2015 9:14 pm ]
Post subject:  Re: Where do these vacuum hoses go? (g13a carb)
Hose 3 connects to the to dizzy, at idle the butterfly covers the vacuum inlet in the throttle body.
When the throttle is opened it supplies vacuum to the dizzy to advance ignition timing as revs increase.

Hose 2 provides vacuum to the idle up actuator located on front of carby body.

Hose 1 attaches to the switch on front of inlet manifold below thermostat housing.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/