| auszookers.com http://auszookers.com/forum/ |
|
| U bolts for 2" lift http://auszookers.com/forum/viewtopic.php?f=37&t=50714 |
Page 1 of 1 |
| Author: | azzas15 [ Tue Aug 04, 2015 4:30 pm ] |
| Post subject: | U bolts for 2" lift |
Hi All, Trying to install some 2" springs in my SJ40t (tray back) narrow track but the u bolts which come with most kits seem to be to wide. I have checked the u bolts and they will work with my SJ50. Does anyone know if it's just the sj40 tray backs that have different u bolts? If all else fails in pulling the SJ50 apart for spares. Could you use the WT hanger plates on the NT diff? Cheers |
|
| Author: | 4x4xzook [ Wed Aug 19, 2015 7:59 am ] |
| Post subject: | Re: U bolts for 2 |
Hi mate, I found some of the u bolts from my NT Sj51t worked on my WT diffs, strangely others did not fit. Just that little bit too tight. Hanger plates should be the same. If you are going new springs, you would be better off getting some new ubolts with it. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|