| auszookers.com http://auszookers.com/forum/ |
|
| Driveshafts http://auszookers.com/forum/viewtopic.php?f=37&t=51537 |
Page 1 of 1 |
| Author: | Bulldog 61 [ Sun Dec 13, 2015 9:02 am ] |
| Post subject: | Driveshafts |
I have what I thought was a NT driveshaft, bolt spacing's are the same but the locating spigot is a bigger diameter. Can anyone enlighten me as to what its off? |
|
| Author: | Gwagensteve [ Mon Dec 14, 2015 8:02 am ] |
| Post subject: | Re: Driveshafts |
Hilux. 1.0 have a smaller spigot than 1.3. All 1.3 and Vitara have the same sized spigot. 1.3nt has a smaller bolt pattern and bolt holes. That's as I recall it (pretty sure 1.3nt and wt have the same spigot diameter, only 1.0 is smaller) |
|
| Author: | Bulldog 61 [ Tue Dec 15, 2015 8:08 am ] |
| Post subject: | Re: Driveshafts |
Hmm looks like its off to the tip then, not much use if I dont know what the hell it fits |
|
| Author: | pezz [ Tue Dec 15, 2015 1:07 pm ] |
| Post subject: | Re: Driveshafts |
Spin down the spigot in a lathe and call it good |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|