auszookers.com
http://auszookers.com/forum/

Coily front diffs.
http://auszookers.com/forum/viewtopic.php?f=37&t=51674
Page 1 of 1

Author:  greenzook89 [ Wed Jan 06, 2016 4:38 pm ]
Post subject:  Coily front diffs.

So i know that "nothing fits a Coily" and that you cant get lockers for the front of a Coily, however, I know the coily front is 2 pin carrier, does anyone know what is the actual size difference or what is different between Coily and say WT or even Jimny? any info would be appreciated.

Author:  Gwagensteve [ Wed Jan 06, 2016 4:50 pm ]
Post subject:  Re: Coily front diffs.

I believe the nearest fit is Jimny front. I recall it is possible to machine a Jimny air locker to fit the front of a coil sierra. There's a couple of mm in it, but I'm not aware of where.

Steve.

Author:  greenzook89 [ Thu Jan 07, 2016 2:57 pm ]
Post subject:  Re: Coily front diffs.

Thanks Steve, happen to know what amount of bolts the coily ring gear is?

Author:  tanshi [ Thu Jan 07, 2016 4:13 pm ]
Post subject:  Re: Coily front diffs.

coily is 1.3 size crown wheel but hi pinion
jimny is 1 litre sized I believe

Author:  tanshi [ Thu Jan 07, 2016 4:14 pm ]
Post subject:  Re: Coily front diffs.

I was looking at doing an adapter kit for jimny airlockers but cant get a coily diff to work with

Author:  Reubs [ Thu Jan 07, 2016 4:18 pm ]
Post subject:  Re: Coily front diffs.

tanshi wrote:
I was looking at doing an adapter kit for jimny airlockers but cant get a coily diff to work with

I have 2 complete front coily diffs & housings I can sell you cheap.

Author:  kenzook [ Thu Jan 07, 2016 7:20 pm ]
Post subject:  Re: Coily front diffs.

i think i offered u one to use? max power to DB??

Author:  tanshi [ Fri Jan 08, 2016 8:50 am ]
Post subject:  Re: Coily front diffs.

yeah mate you did, but I would prefer to have one I can tear down and not have to return so I can work on it properly

how cheap reubs?

Author:  Reubs [ Mon Jan 18, 2016 9:36 pm ]
Post subject:  Re: Coily front diffs.

tanshi wrote:
yeah mate you did, but I would prefer to have one I can tear down and not have to return so I can work on it properly

how cheap reubs?

I'll send ya a message. I feel like going for a long drive so how's $125 delivered to your place sound? Mates rates.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/