| auszookers.com http://auszookers.com/forum/ |
|
| gearbox removal 97 vitara swb http://auszookers.com/forum/viewtopic.php?f=37&t=51876 |
Page 1 of 1 |
| Author: | taurean [ Sat Feb 06, 2016 8:17 am ] |
| Post subject: | gearbox removal 97 vitara swb |
Hi all, i am currently in the process of removing my gearbox to replace the clutch. im having quite a bit of trouble sliding it out as it seems to be really tight as if something is stopping it. i dont think ive missed any bolts anywhere as its pulled away from the motor with about a 5-10mm even gap all around. maybe ive missed something? or is it just being stubborn and will take a bit of fiddling to release. it just seems too tight and i dont really wanna break anything. anything i should look at? cheers Taurean |
|
| Author: | gregwatkins75 [ Sat Feb 06, 2016 12:22 pm ] |
| Post subject: | Re: gearbox removal 97 vitara swb |
Clutch cable off? All 6 bolts out? Gear sticks out? Cross mount out? Speedo cables off? Tail shafts out? There's two wire looms at to off grearbox to unhook which had me for a bit.....ones reverse light cur it other is pollution crap... There's nothing hard to it.....just have to make sure it's all unhooked first. |
|
| Author: | redvitara [ Sat Feb 06, 2016 8:54 pm ] |
| Post subject: | Re: gearbox removal 97 vitara swb |
What about the pressed steel cover that closes off the front/bottom of the bell housing. It's bolted to the bell housing but the flywheel is between it & the bell housing. Silverfox1111 |
|
| Author: | taurean [ Sun Feb 07, 2016 7:16 am ] |
| Post subject: | Re: gearbox removal 97 vitara swb |
Cheers for the replies, yeah all of the above has been done, and ive checked it over a few times. i have got my mechanic friend coming to give me a hand tomorrow, he should be able to get it sorted. ive had enough haha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|