auszookers.com
http://auszookers.com/forum/

Custom Sierra soft top
http://auszookers.com/forum/viewtopic.php?f=37&t=52369		 Page 1 of 1
Author:  Yake [ Sun Apr 24, 2016 6:09 pm ]
Post subject:  Custom Sierra soft top
Hey guys this has probably been asked a thousand times before but just wondering if anyone has custom made a soft top to basically just go straight down from the roof to the floor behind the back seats to give it that ute look. The only one I found online needed to be strapped to a roll bar and didn't completely seal. So if anyone has made one or seen one could you post a pic just curious to see what's been done, oh and it's for a 1991 SJ70.

Thanks heaps! :peaceout:
Author:  andrew [ Tue Apr 26, 2016 12:35 pm ]
Post subject:  Re: Custom Sierra soft top
i seen some like that on ebay.. i got my soft top from a company called pavment ends its really good cost me about 350 bucks they have a few different style of tops available
Author:  alien [ Thu May 05, 2016 10:37 pm ]
Post subject:  Re: Custom Sierra soft top
Bulldog trimming on here - check the business section:

viewtopic.php?f=15&t=26330

Image
Author:  Yake [ Sun May 08, 2016 9:35 am ]
Post subject:  Re: Custom Sierra soft top
Awesome thanks guys will suss it out :)
Author:  Yake [ Mon Jun 20, 2016 9:48 am ]
Post subject:  Re: Custom Sierra soft top
So I went with Bulldog trimming and I would highly recommend them :peaceout: was a fast, easy transaction and the top is great quality. :peaceout: gave me the exact look I was after :mrgreen:
Image
Author:  shiv [ Mon Jun 20, 2016 1:07 pm ]
Post subject:  Re: Custom Sierra soft top
Nice. wish i did that with my first Zook
Author:  alien [ Mon Jun 20, 2016 2:25 pm ]
Post subject:  Re: Custom Sierra soft top
Very nice! I've been working with David on some design tweaks to the top and it seems you got a few of them =) In particular the attachment of the windjammer to the bikini via zip =)

Looking forward to getting my new set soon.
Author:  Benchai [ Mon Jun 20, 2016 4:57 pm ]
Post subject:  Re: Custom Sierra soft top
Thanks for the positive feedback :peaceout:

It looks like it could use being pulled down a bit further. I should have put a clip in the bottom on the sides of the windjammer, but it sat down pretty well on the jig body. If it's not coming off often, you might consider putting a tek screw in to keep it down and fitting nicely. Because of the taper on the sides, as it rides up it will be baggy, and we all love a tight fit. 8)
Author:  Yake [ Mon Jun 20, 2016 5:44 pm ]
Post subject:  Re: Custom Sierra soft top
Yeah will probably end up screwing it to the floor eventually but isn't bothering me at the moment, thanks again! :)
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/