| auszookers.com http://auszookers.com/forum/ |
|
| How to adjust the handbrake on NT http://auszookers.com/forum/viewtopic.php?f=37&t=52599 |
Page 1 of 1 |
| Author: | cairns27 [ Tue Jun 07, 2016 4:34 am ] |
| Post subject: | How to adjust the handbrake on NT |
Yeah, I looked in the FSM, but the 'photo is not all that clear...without removing the drum, looking from the rear at what o'clock is the adjuster...I've written arrows for on and off on the drum[a long, long time ago] but can't find the adjuster through the hole...tar bye |
|
| Author: | Scrawny [ Tue Jun 07, 2016 6:05 am ] |
| Post subject: | Re: How to adjust the handbrake on NT |
Should be at 6 (right at the bottom) |
|
| Author: | cairns27 [ Tue Jun 07, 2016 6:13 am ] |
| Post subject: | Re: How to adjust the handbrake on NT |
Tar, I have another go later today. I did look in selected tech on the NBS website, and they said 2 o'clock.. bye |
|
| Author: | Blkfxx [ Tue Jun 07, 2016 1:53 pm ] |
| Post subject: | Re: How to adjust the handbrake on NT |
4/5 o'clock. 100% easier to take the drum off and get it close to spec then any final adjustments with it back on. Also makes it easier to see if you are tightening the pads up rather than loosening. |
|
| Author: | cairns27 [ Tue Jun 07, 2016 3:32 pm ] |
| Post subject: | Re: How to adjust the handbrake on NT |
Yeah, OK I'll take the drum off...........tar bye |
|
| Author: | cairns27 [ Mon Jun 13, 2016 4:15 am ] |
| Post subject: | Re: How to adjust the handbrake on NT |
The adjusters are at 4 & 5 , easy to do when you know where they are. tar bye |
|
| Author: | cairns27 [ Fri Jun 17, 2016 12:33 pm ] |
| Post subject: | Re: How to adjust the handbrake on NT |
I just tried to order a handbrake cable through FNQ filters Mareeba...they needed the Vin No. , not all NT's have the same cable??? bye |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|