4.16 reduction gears are 12% reduction in high, 84% in low compared to 1.3 standard gearing. Not sure what that equates to in ratios, unmotivated to do the maths
1.3 case is 1.409:1 in high and
2.268:1 in low. Or thereabouts
| auszookers.com http://auszookers.com/forum/ |
|
| Jimny and Sierra Transfer Case standard gearing http://auszookers.com/forum/viewtopic.php?f=37&t=52811 |
Page 1 of 1 |
| Author: | Hoogz [ Wed Jul 13, 2016 9:50 am ] |
| Post subject: | Jimny and Sierra Transfer Case standard gearing |
Morning all... I own a 2015 Jimny (manual) and just wanted to know what the standard transfer case gearing was? (Guessing it's 1:1 high, and somewhere close to 2:1 low)... I'm thinking of putting the Sierra Transfer in... Does anyone know what there high and low gearing is standard? When you see 4.16:1 reduction gears, what does that equate to in high and low ratios? Thanks |
|
| Author: | bumstein [ Wed Jul 13, 2016 12:31 pm ] |
| Post subject: | Re: Jimny and Sierra Transfer Case standard gearing |
4.16 reduction gears are 12% reduction in high, 84% in low compared to 1.3 standard gearing. Not sure what that equates to in ratios, unmotivated to do the maths 1.3 case is 1.409:1 in high and 2.268:1 in low. Or thereabouts |
|
| Author: | Hoogz [ Wed Jul 13, 2016 12:58 pm ] |
| Post subject: | Re: Jimny and Sierra Transfer Case standard gearing |
cheers mate |
|
| Author: | Gwagensteve [ Wed Jul 13, 2016 4:09 pm ] |
| Post subject: | Re: Jimny and Sierra Transfer Case standard gearing |
Stock manual VVT Jimny is 1.00 high 2.002 4.1 transfer gears are 1.58 high 4.16 low. I guess you'll have to work out whether you can tolerate 40% or nearly 60% higher road revs when cruising. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|