auszookers.com
http://auszookers.com/forum/

GV SWB lift questions
http://auszookers.com/forum/viewtopic.php?f=37&t=52896
Page 1 of 1

Author:  monica182 [ Sun Jul 31, 2016 6:20 pm ]
Post subject:  GV SWB lift questions

Hi all

New poster here. We have just purchased a 2003 GV SWB for our daughter who is about to get her license. As a family that's always been into 4wding she was keen for her own. With budget, practicality and fuel efficiency in mind we thought the GV would be a good fit

We found a well priced GV last week that already had some mods so was a good start for her. It has spotlights, dual battery provisions, uhf, light bar, rear 12v plug and upgraded stereo. It has 245/70 tyres fitted that looked like a pretty tight squeeze and looks like from the inner guards that there was a fair bit of scraping going on. A lift was the first thing on the list and managed to pick up some second hand King springs from a v6 LWB model, which meant the front springs were going to give it more lift than SWB raised springs. As we are planning to add the second battery and front bar in the near future we didn't think this will be too much of a problem.

After a bit of messing around my husband got the springs installed yesterday. Front came up about 60mm and back around 50mm. After managing to track down some camber bolts at repco these were installed and fixed around 90% of the front wheel angle. We have left the standard shocks in for now as it's driving fine on road but after taking it to the pines last night it seems the rear shocks don't have enough travel.

So after all the back story I am looking for recommendations of what shocks to fit in the rear to suit the increase in 50mm of height. Also what other components should we replace bearing in mind that the bigger tyres are also giving us an extra
inch of lift. We've always had landcruiser without ifs so just want to make sure we are changing all the things that should be changed, whilst still sticking to a tight budget!

Thanks in advance for any help :)

Pic of car as it sits now

Image
No idea how to use photobucket so hopefully that worked!

Author:  just_cruizin [ Sun Jul 31, 2016 7:20 pm ]
Post subject:  Re: GV SWB lift questions

Most GV and Vit kits are 40mm as that's about the maximum the CVs can handle, as you've gone beyond this I'd be looking at a diff drop kit to regain a better CV angle. Shock wise once again finding a shock to suit that height will be a challenge

Author:  monica182 [ Sun Jul 31, 2016 7:23 pm ]
Post subject:  Re: GV SWB lift questions

Ok I have been looking into the diff drop kits so will make this a priority. Thanks

Author:  Chop [ Sun Jul 31, 2016 9:44 pm ]
Post subject:  Re: GV SWB lift questions

Panhard relocation bracket for the rear!

Author:  monica182 [ Sun Jul 31, 2016 10:37 pm ]
Post subject:  Re: GV SWB lift questions

Have just ordered diff drop bracket, bump stop extensions and camira shocks. Will look for the panhard brackets as well. Thanks.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/