auszookers.com
http://auszookers.com/forum/

G16b wiring for sj70
http://auszookers.com/forum/viewtopic.php?f=37&t=53348		 Page 1 of 1
Author:  TALLEN7 [ Sat Oct 08, 2016 10:41 pm ]
Post subject:  G16b wiring for sj70
Hi everyone, is anyone on here from WA that can wire in a G16B into a sj70, i'm having heaps of issues.

Been using warbirds guide but things don't seem to be adding up, I may even have the wrong ECU and/or wiring harness.

Thanks in advance, Tom.
Author:  MrRocky [ Sun Oct 09, 2016 12:46 pm ]
Post subject:  Re: G16b wiring for sj70
What g16b motor is it ?
Im in wa and can do full plug and play baleno g16b harness but dont do the vitara g16 ones.
Author:  rexhunta [ Sun Oct 09, 2016 1:08 pm ]
Post subject:  Re: G16b wiring for sj70
The warbirds manual only covers series 1 vitara, not series 2 which runs a different loom/ecu/afm/injectorloom.
Author:  TALLEN7 [ Sun Oct 09, 2016 4:12 pm ]
Post subject:  Re: G16b wiring for sj70
rexhunta wrote:
The warbirds manual only covers series 1 vitara, not series 2 which runs a different loom/ecu/afm/injectorloom.


I'm starting to think that's my issue. it must be a series 2 as i have the 5 pin afm and the injector loom doesn't match up what so ever with his write up, I also have a 2 pin dizzy :(

Is it still possible to do the conversion?
Author:  TALLEN7 [ Mon Oct 10, 2016 7:45 pm ]
Post subject:  Re: G16b wiring for sj70
rexhunta wrote:
The warbirds manual only covers series 1 vitara, not series 2 which runs a different loom/ecu/afm/injectorloom.


I'm thinking that's what my issue is, would you know if the swap is still possible, would i just need an obd2 diagram and work it out from there or do i need to swap components over?

Thanks for the replies.
Author:  TALLEN7 [ Tue Oct 11, 2016 8:53 pm ]
Post subject:  Re: G16b wiring for sj70
WHY ARENT MY REPLIES BEING POSTED!!!!!!!!!
Author:  henno [ Thu Oct 13, 2016 9:02 am ]
Post subject:  Re: G16b wiring for sj70
TALLEN7 wrote:
WHY ARENT MY REPLIES BEING POSTED!!!!!!!!!


Turn the volume down; new members join a moderation queue that needs to be approved.
Author:  rexhunta [ Thu Oct 13, 2016 8:14 pm ]
Post subject:  Re: G16b wiring for sj70
I've done both series Vitara, the 2nd series being easier then the first. Depending on how literate you are with wiring diagrams, I can put up the ecu pinouts for the 2nd series. You'll have the hotwire AFM if it is, and the smaller Dizzy cap.

edit :

series 1 is the 5 pin AFM that is the vane type.
series 2 is the hotwire afm which is 3 pin.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/