| auszookers.com http://auszookers.com/forum/ |
|
| rear engine seal http://auszookers.com/forum/viewtopic.php?f=37&t=56417 |
Page 1 of 1 |
| Author: | tanked [ Mon May 11, 2020 5:23 pm ] |
| Post subject: | rear engine seal |
hey all just a quick question.. I have to do the rear engine seal on my sierra (g16a) engine which is annoying but it happens.. I have a BenT adapter kit on it to the gearbox... The question I have is do I have to pull the motor to get to the back of the engine, or will i have enough space to just unbolt engine mounts support engine and box and slide engine forwards and undo jack shaft and try and slide gear box back. I am ok to pull the motor but just the motivation to that is more effort. Thanks :} |
|
| Author: | 303zuke [ Mon May 11, 2020 8:15 pm ] |
| Post subject: | Re: rear engine seal |
Leave the Engine there, drop the Gearbox. |
|
| Author: | tanked82 [ Mon May 11, 2020 8:18 pm ] |
| Post subject: | Re: rear engine seal |
Can I get the gearbox out with the pins that come with the benT kit that are in the block? |
|
| Author: | tanked [ Fri Jun 05, 2020 8:21 pm ] |
| Post subject: | Re: rear engine seal |
so update wasnt the rear engine seal, was the gearbox input shaft seal..fun times all fixed and in |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|