| auszookers.com http://auszookers.com/forum/ |
|
| Spring Perch question http://auszookers.com/forum/viewtopic.php?f=37&t=56489 |
Page 1 of 1 |
| Author: | Allergee25 [ Sun Jun 28, 2020 7:55 pm ] |
| Post subject: | Spring Perch question |
Just wondering where people get their spring perches from when doing a w/t conversion? or is it easy enough to get them off and reuse? |
|
| Author: | bumstein [ Sun Jun 28, 2020 8:30 pm ] |
| Post subject: | Spring Perch question |
Don’t think you can reuse them, they’d be destroyed once you get them off. I used the ones from Low Range Off Road but there’s likely other suppliers. Have a look at ADD engineering or Coliso 4wd products, not sure off the top of my head but there’s a good chance they might offer something |
|
| Author: | Gwagensteve [ Sun Jun 28, 2020 8:55 pm ] |
| Post subject: | Re: Spring Perch question |
I’ve reused them loads of times, if you’re not trying to save the NT housings it’s easy to save the perches. |
|
| Author: | Allergee25 [ Sun Jun 28, 2020 9:07 pm ] |
| Post subject: | Re: Spring Perch question |
Gwagensteve wrote: I’ve reused them loads of times, if you’re not trying to save the NT housings it’s easy to save the perches. Thank you for the prompt replies! Ill try cutting the perches off the NT housings because they are pretty old and nasty. Cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|