Rusho81 wrote:
Aren't 31's on a zook in QLD technically illegal anyway?
thats what i thought two?
| auszookers.com http://auszookers.com/forum/ |
|
| 33" tyres enginerred? http://auszookers.com/forum/viewtopic.php?f=5&t=10033 |
Page 1 of 1 |
| Author: | sierra_666 [ Tue Feb 23, 2010 1:58 am ] |
| Post subject: | 33" tyres enginerred? |
doe anyone no what needs to be done to be able to legally run 33's on a n't sierra? 31's just aint bigg enough! i figure maybe axel upgrades maybe tailshafts? has anyone done this and can help at all? |
|
| Author: | Rusho [ Tue Feb 23, 2010 2:03 am ] |
| Post subject: | Re: 33" tyres enginerred? |
Aren't 31's on a zook in QLD technically illegal anyway? |
|
| Author: | alex [ Tue Feb 23, 2010 2:12 am ] |
| Post subject: | Re: 33" tyres enginerred? |
Rusho81 wrote: Aren't 31's on a zook in QLD technically illegal anyway?
thats what i thought two?
|
|
| Author: | Taff [ Tue Feb 23, 2010 2:16 am ] |
| Post subject: | Re: 33" tyres enginerred? |
in QLD? you cant. |
|
| Author: | steak_knife [ Tue Feb 23, 2010 2:53 am ] |
| Post subject: | Re: 33" tyres enginerred? |
Taff wrote: in QLD? you cant.
That's where I am & what did you call me?? 
Legaly 235/75r15's are to big, and last time I looked a want33s car, 33's are a f*#k load bigger. I don't think an engineer would pass 31's in Qld, I tried to get 235's put on a mod plate year's ago & he just laughed at me & scribed STD in the tyre size section. But how many of us have ever been booked for the "tyre size" not tyre's hanging out of the guards? |
|
| Author: | want33s [ Tue Feb 23, 2010 3:03 am ] |
| Post subject: | Re: 33" tyres enginerred? |
In Qld, the maximum permissable tyre is 15mm larger diameter than standard fitment on ANY car..... so a Zook that has 205/75-15 as standard will JUST get away with 215/75-15 but NO larger. |
|
| Author: | want33s [ Tue Feb 23, 2010 3:08 am ] |
| Post subject: | Re: 33" tyres enginerred? |
ZookiMonsta wrote: well, your wheel bearings won't like it but anyway,
put wide tracks diffs under it and some kinda, SUPER Flair. & even then I doubt it would be enginerrable. Speak to JoeBlow, he knows a fair bit about Trail/Street zooks. Corey, what has the height of a tyre got to do with wheel bearings or flares???????? Don't bother asking Joe, he is in Victoria.... Might as well be Uzbeckistan... Rules are ALL different down there... Qld you can run stock diameter and 1.3 times original width but only if track width is not increased by more than 25mm per side (50mm total). |
|
| Author: | joeblow [ Tue Feb 23, 2010 3:18 am ] |
| Post subject: | Re: 33" tyres enginerred? |
want33s wrote: Don't bother asking Joe, he is in Victoria.... Might as well be Uzbeckistan... Rules are ALL different down there... don't ya just luuuurve victoria?...  but then again, some engineers will do larger tyres on a zook...and some won't down here.
and the laws in uzbeckistan are actually harsher. |
|
| Author: | JrZook [ Tue Feb 23, 2010 3:50 am ] |
| Post subject: | Re: 33" tyres enginerred? |
Why are there two threads the same...................... |
|
| Author: | mnemonix [ Tue Feb 23, 2010 11:44 am ] |
| Post subject: | Re: 33" tyres enginerred? |
JrZook wrote: Why are there two threads the same......................
Because some dickheads need to be told more than once. 
|
|
| Author: | Taff [ Tue Feb 23, 2010 4:19 pm ] |
| Post subject: | Re: 33" tyres enginerred? |
steknig wrote: Taff wrote: in QLD? you cant. That's where I am & what did you call me?? I just got this, your funny stekky 
|
|
| Author: | sierra_666 [ Wed Feb 24, 2010 1:05 am ] |
| Post subject: | Re: 33" tyres enginerred? |
i have already w/t diffs on n/t sierra and as it is i run 31 x 11.5 tyres i just want more lift i have a 2 inch body shackle and suspenion already, i just thought 33's would be the easiest way to get more lift? i thought i'd be pushing my luck to get it engineered but thought i might as well ask |
|
| Author: | Taff [ Wed Feb 24, 2010 1:07 am ] |
| Post subject: | Re: 33" tyres enginerred? |
your 31s are already illegal as is most of your other mods. why worry about tyre size now? |
|
| Author: | royce [ Wed Feb 24, 2010 1:07 am ] |
| Post subject: | Re: 33" tyres enginerred? |
want33s wrote: ZookiMonsta wrote: well, your wheel bearings won't like it but anyway, put wide tracks diffs under it and some kinda, SUPER Flair. & even then I doubt it would be enginerrable. Speak to JoeBlow, he knows a fair bit about Trail/Street zooks. Corey, what has the height of a tyre got to do with wheel bearings or flares???????? Don't bother asking Joe, he is in Victoria.... Might as well be Uzbeckistan... Rules are ALL different down there... Qld you can run stock diameter and 1.3 times original width but only if track width is not increased by more than 25mm per side (50mm total). 1.3 is only for hairdresser cars, 1.5 times for solid axle 
|
|
| Author: | sierra_666 [ Wed Feb 24, 2010 1:10 am ] |
| Post subject: | Re: 33" tyres enginerred? |
fair call taff, i should just throw them on anyway you reckon? |
|
| Author: | Taff [ Wed Feb 24, 2010 1:19 am ] |
| Post subject: | Re: 33" tyres enginerred? |
if you want to run 33s run 33s. They are no more illegal than 31s |
|
| Author: | Rusho [ Wed Feb 24, 2010 1:20 am ] |
| Post subject: | Re: 33" tyres enginerred? |
sierra_666 wrote: fair call taff, i should just throw them on anyway you reckon?
Yep...then lots of pics
|
|
| Author: | Taff [ Wed Feb 24, 2010 1:20 am ] |
| Post subject: | Re: 33" tyres enginerred? |
or your extended shackles or your bodylift which i assume isnt approved. |
|
| Author: | sierra_666 [ Wed Feb 24, 2010 1:23 am ] |
| Post subject: | Re: 33" tyres enginerred? |
ha ha no none of this is approved but it has IMPROVED my offroad ability |
|
| Author: | foolsp33d [ Wed Feb 24, 2010 3:57 am ] |
| Post subject: | Re: 33" tyres enginerred? |
maybe you need to get some 9inch shackles and get Golden gloves '(whing)engeneering' to give some adivce... http://www.outerlimits4x4.com/ftopic191 ... ht=shakles contactable here.. http://www.myspace.com/coza90 im pondering how big a rock your trying to clear!? thought about going AROUND it instead?!? 35's seem like a bit of overkill.. more likely for \/\/ank value imho... |
|
| Author: | sierra_666 [ Sun Feb 28, 2010 12:33 am ] |
| Post subject: | Re: 33" tyres enginerred? |
9" shackles wow they come that big for a sierra |
|
| Author: | BUZOOKA [ Sun Feb 28, 2010 3:53 am ] |
| Post subject: | Re: 33" tyres enginerred? |
sierra_666 wrote: 9" shackles wow they come that big for a sierra
u can make a 20 inch shackle if u want doesnt matter wat a company amkes if u got a welder and grinder ur ready to start custom work on ur zook |
|
| Author: | foolsp33d [ Sun Feb 28, 2010 4:07 am ] |
| Post subject: | Re: 33" tyres enginerred? |
BUZOOKA wrote: sierra_666 wrote: 9" shackles wow they come that big for a sierra u can make a 20 inch shackle if u want doesnt matter wat a company amkes if u got a welder and grinder ur ready to start custom work on ur zook 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|