ok any one know how i would go about fitting this??
just having a looky see atm...
this is the box
| auszookers.com http://auszookers.com/forum/ |
|
| Crown PS to zook http://auszookers.com/forum/viewtopic.php?f=5&t=10328 |
Page 1 of 1 |
| Author: | jonno_racing [ Tue Mar 09, 2010 10:47 pm ] |
| Post subject: | Crown PS to zook |
ok any one know how i would go about fitting this?? just having a looky see atm... this is the box
|
|
| Author: | Brett [ Tue Mar 09, 2010 11:10 pm ] |
| Post subject: | Re: Crown PS to zook |
they bolt up to the steering shaft, one bolt lines up. i haven't done it but its the one i'll i'll be putting in mine. a guy on outers did one last year. |
|
| Author: | bazook [ Wed Mar 10, 2010 12:15 am ] |
| Post subject: | Re: Crown PS to zook |
i know a cresida steering box lines up with one of the bolts and the rag joint lines up so maybe a crown will to |
|
| Author: | BenT [ Wed Mar 10, 2010 1:21 am ] |
| Post subject: | Re: Crown PS to zook |
I do a bolt on adaptor to fit Cressida / Celica p/s boxes. Some Crowns are also the same, although the one in your pic looks different, with the sensor on top. Have you got any more pics of the box out of the car? 
Ben |
|
| Author: | Brett [ Wed Mar 10, 2010 1:23 am ] |
| Post subject: | Re: Crown PS to zook |
and waht does the kit cost? |
|
| Author: | atari4x4 [ Wed Mar 10, 2010 2:05 am ] |
| Post subject: | Re: Crown PS to zook |
$220 + Shipping... see in his sig line |
|
| Author: | BenT [ Wed Mar 10, 2010 2:16 am ] |
| Post subject: | Re: Crown PS to zook |
$220+shipping is for my Vitara kit which has a machined wedge. The adaptor pictured above is for the Toyota Celica / Cressida power steering box. Price for the adaptor and countersunk cap screws to bolt it all together - $95. For a kit including a mount adaptor for fitting the Vitara pump to the block - $145. Shipping = $12 for just the mount, $18 including pump mount. Ben |
|
| Author: | steak_knife [ Wed Mar 10, 2010 2:18 am ] |
| Post subject: | Re: Crown PS to zook |
Hi Ben, is thay any of the old Rwd cilly car's?? |
|
| Author: | jonno_racing [ Wed Mar 10, 2010 2:30 am ] |
| Post subject: | Re: Crown PS to zook |
hey ben i will let you know.. |
|
| Author: | BenT [ Wed Mar 10, 2010 2:33 am ] |
| Post subject: | Re: Crown PS to zook |
steknig wrote: Hi Ben, is thay any of the old Rwd cilly car's??
As long as its box and not rack and pinion! Some are non p/s too. Most Celicas / Cresidas / Corona's and possibly some Crowns from late 70's to early 80's had the same steering box . Ben |
|
| Author: | steak_knife [ Wed Mar 10, 2010 2:36 am ] |
| Post subject: | Re: Crown PS to zook |
Cheer's mate, I'll look out for a box & pm ya. You make good stuff for zook's, your a legend!! 
|
|
| Author: | jonno_racing [ Wed Mar 10, 2010 2:51 am ] |
| Post subject: | Re: Crown PS to zook |
i have scored the box, pump and lines for $100 in good nick 
what elce is involved in making it fit? |
|
| Author: | BlueSuzy [ Wed Mar 10, 2010 12:49 pm ] |
| Post subject: | Re: Crown PS to zook |
Belt, Fluid, Have a look.. |
|
| Author: | BenT [ Wed Mar 10, 2010 1:56 pm ] |
| Post subject: | Re: Crown PS to zook |
jonno_racing wrote: i have scored the box, pump and lines for $100 in good nick
what elce is involved in making it fit? First up you need to check that it is the correct box. It looks different to the Celica / Cressida boxes, although it may still have the same bolt pattern, and may still work. Second, you will need to make a pump mount if you want to use the Toyota pump. My pump mount bracket is for mounting a Vitara pump (which works great with the Toy box) Third, you will need a double row front pulley. Allready there if you have a 1600 conversion. Fourth, you will need a Vitara pitman arm to go on the box. The Toyota one has a balljoint in the end rather than a tapered hole, so doesn't work with the zuk links. A vitara one will bolt on to a Celica or Cressida box. Fifth, you will need to get a hard line made up to go from the box to the pump for the high pressure line. Make sure you get the flare nuts off the donor vehicles so you can get one of these made up. The return line is just a rubber hose held on with hose clips. Sixth. Like bluesuzy says, belt and fluid and thats about it. Ben |
|
| Author: | joeblow [ Wed Mar 10, 2010 2:14 pm ] |
| Post subject: | Re: Crown PS to zook |
crown boxes have a different bolt pattern than cressida, and also thier input shaft length is not the same so you will have to shorten your intermediate shaft. if you plan on using wedges and one day engineering your car check with an engineer as often those types of wedges will not be allowed. drilling two holes in the chassis and sleeving them correctly is quite simple. also, a million and one lancruiser arms and daihatsu arms (also jimny) will fit too. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|