sounds like you could have a problem with your hubs.
did u rember to put them in
| auszookers.com http://auszookers.com/forum/ |
|
| 4WD not engaging ??? http://auszookers.com/forum/viewtopic.php?f=5&t=10331 |
Page 1 of 2 |
| Author: | IN2DEP [ Tue Mar 09, 2010 11:45 pm ] |
| Post subject: | 4WD not engaging ??? |
Hey guys I tryed pulling a mate out today and it wasnt engaging to 4wd, Everything was working right, tcase was running and the gear shift was in but the front wheels wernt spinning at all, not even on wet grass What do yous think ?? |
|
| Author: | lordviper556 [ Tue Mar 09, 2010 11:47 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
sounds like you could have a problem with your hubs. did u rember to put them in
|
|
| Author: | steak_knife [ Wed Mar 10, 2010 12:09 am ] |
| Post subject: | Re: 4WD not engaging ??? |
lordviper556 wrote: sounds like you could have a problem with your hubs.
did u rember to put them in :P Done that!!! 
Was the front shaft spinning? sound's like hub's |
|
| Author: | IN2DEP [ Wed Mar 10, 2010 12:15 am ] |
| Post subject: | Re: 4WD not engaging ??? |
lol The first thing i do when going off road is locking the hubs lol not to sure if the front shaft was spinning but ill have a check and see Cheers guys 
|
|
| Author: | steak_knife [ Wed Mar 10, 2010 12:16 am ] |
| Post subject: | Re: 4WD not engaging ??? |
IN2DEP wrote: lol The first thing i do when going off road is locking the hubs lol not to sure if the front shaft was spinning but ill have a check and see
Cheers guys Ur un lock em, mine had been locked for a couple of week's, I got out & un locked em, still turned em tho!!    
|
|
| Author: | IN2DEP [ Wed Mar 10, 2010 10:14 am ] |
| Post subject: | Re: 4WD not engaging ??? |
Well i always take them out off lock soon as i hit the road, ill check it out after work and let you guys know |
|
| Author: | IN2DEP [ Wed Mar 10, 2010 9:32 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
Yup !! the front drive shaft is spinning, I passed by the ballarat ARB shop after work today and asked him and he told me that its my free wheeling hubs So i guess its time to get new hubs lol |
|
| Author: | lordviper556 [ Wed Mar 10, 2010 11:21 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
they are pretty cheap i got a set for about 80 bucks from the wreckers |
|
| Author: | steak_knife [ Wed Mar 10, 2010 11:44 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
IN2DEP wrote: Yup !! the front drive shaft is spinning, I passed by the ballarat ARB shop after work today and asked him and he told me that its my free wheeling hubs
So i guess its time to get new hubs lol Pull em apart & see if it's not just a simple lack of lubrication in there, shit load's cheaper if it is.. |
|
| Author: | IN2DEP [ Thu Mar 11, 2010 1:14 am ] |
| Post subject: | Re: 4WD not engaging ??? |
Well i told the guy that checked it that the left side one is very hard to turn and that ive been using a shifter to turn it cause it was so hard to turn and he said well thats the problem then, he gos it only takes one to go wrong for both not to work, but ill open them up on sat and see what if anything looks wrong or need more lub |
|
| Author: | MrRocky [ Thu Mar 11, 2010 1:21 am ] |
| Post subject: | Re: 4WD not engaging ??? |
$10 says the spring is broken inside the hub and that it has no grease in there. |
|
| Author: | IN2DEP [ Thu Mar 11, 2010 4:16 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
lol how much does a spring cost ??
|
|
| Author: | MrRocky [ Thu Mar 11, 2010 11:39 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
thats the best part, you cant just buy the spring, you have to but a rebuild kit or a second hand hub  even though a new spring would cost $2 n-one makes them.
|
|
| Author: | IN2DEP [ Sun Mar 14, 2010 3:13 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
Opened it up the other day, dry as a bone, no lub and all rusty and shit, that was just the first part i couldnt get the other part off lol so does that mean its farked or can i fix it ?? |
|
| Author: | 89_tintop [ Sun Mar 14, 2010 3:58 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
mine were in similar condition.. i pulled them apart sandblasted some pieces and clean the rest on a wire wheel. greased them and put em back together.. still werent 100% but got me out of trouble. ended up with a spare set now as it was always in the back of my head that they werent 100%. will be fully rebuilding the spares when i get time |
|
| Author: | IN2DEP [ Sun Mar 14, 2010 5:12 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
89_tintop wrote: mine were in similar condition..
i pulled them apart sandblasted some pieces and clean the rest on a wire wheel. greased them and put em back together.. still werent 100% but got me out of trouble. ended up with a spare set now as it was always in the back of my head that they werent 100%. will be fully rebuilding the spares when i get time Yeah thats what im thinkingof doing getting new ones and rebuilding the old ones for spares any body got a price on getting new ones fitted ?? |
|
| Author: | lordviper556 [ Sun Mar 14, 2010 10:31 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
i got a set for 80 bucks, and you can fit them yourself. only 5 or 6 bolts to undo slip the old 1 off and then put the new 1 on and bobs ur aunty lol. |
|
| Author: | want33s [ Sun Mar 14, 2010 11:00 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
I have a few sets of good used Sierra hubs here... |
|
| Author: | IN2DEP [ Mon Mar 15, 2010 11:10 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
want33s wrote: I have a few sets of good used Sierra hubs here... PM sent 
|
|
| Author: | lauby [ Wed Aug 11, 2010 3:03 am ] |
| Post subject: | Re: 4WD not engaging ??? |
in the process of stripping a front WT diff, following the manual and this bit came of before it was supposed too. before 
after 
Then i took the hub of and discovered this, The one on the right 
new hub required, i agree. but what about the picture 1 and 2, should i be looking for another diff or is there a part to fix this ? . |
|
| Author: | finlay113 [ Wed Aug 11, 2010 3:07 am ] |
| Post subject: | Re: 4WD not engaging ??? |
you just need a new stub and bearings. theres just 4 bolts to pull the stub off. the tin backing plate will come off with it also |
|
| Author: | whincup [ Wed Aug 18, 2010 2:25 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
so did it just turn out to be something broken in the hub? ive just spent 3 hours digging my car out of the mud because it wont go into 4wd... front shaft is spinning, front left hub needs a set of pliers to turn however the tyre on that side does look like its getting a little bit of power so im guessing the other side hub is broken. keen to know exactly what went wrong because i have almost identical symptoms. |
|
| Author: | 1oftheboys [ Tue Jul 24, 2012 2:25 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
rather than starting a new thread hope i'm doing the right thing by jumping onto this one. I'm having same probs as people here, vitara hubs are locked, front shafts are spinning when in 4wd but the wheels aren't. Read through and thought it could be my hubs. Opened them up and they were pretty rusty (pics below). From how they look I'm guessing that they're stuffed?! Next question is if they are stuffed would i be better off with decent set of second handys or a brand new set? Don't use 4WD as often as i'd like but want it to work properly when i do 
|
|
| Author: | Jazzor [ Tue Jul 24, 2012 3:27 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
Yea your right, that cog/gear needs to slide onto the other gears spline on the end of the axle for the front wheels to turn. See if you can get some oil/grease into them and get them moving, but they look like they are in pretty bad condition going by the pic. Have you had the hubs in and the front wheels turning before?, that's very dry
|
|
| Author: | want33s [ Tue Jul 24, 2012 3:58 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
I have a big bucket full of hubs here.. Does anyone think it's worth my time to reco a few? |
|
| Author: | suzukikid [ Tue Jul 24, 2012 4:20 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
hey in2deep i got a few hub parts here if ya work out what is wrong.... |
|
| Author: | 1oftheboys [ Tue Jul 24, 2012 5:24 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
when i bought it the guy said he'd taken it on the beach in 4wd. He seemed like a genuine guy so i believed it was working...until we got stuck the other week and had no 4wd to get out! If i did get them working would they last very long given their condition? Just want to know if its worth the time trying to get them working |
|
| Author: | Jazzor [ Tue Jul 24, 2012 11:32 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
Ah so he may have thought 4wd was working while tearing around in 2wd. A set of 2nd hand ones will be cheap and work, want33s wanted $50 for some 2 years ago!, i'm not sure if they have increased in value .You could always have a go while organising to get another set?, if you can get them apart, clean them up to get the surface rust off and grease them up they could come up ok. If it were me I would have a quick go and see how they come up, and if not really well buy another set. It may be worth checking the rest of the front dif too, if the hubs are that neglected the rest of it behind the hub may be in need to of maintenance too .
|
|
| Author: | just_cruizin [ Wed Jul 25, 2012 1:14 am ] |
| Post subject: | Re: 4WD not engaging ??? |
just break more CV's that way you always inspect and lube your hubs. |
|
| Author: | suzukikid [ Wed Jul 25, 2012 6:19 pm ] |
| Post subject: | Re: 4WD not engaging ??? |
just cruizin ya spot on there!!!! |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|