joeblow wrote:
depends on the size of the v6.
So the SV's fit??
I know the SQ's are different.
| auszookers.com http://auszookers.com/forum/ |
|
| v6 transfercase http://auszookers.com/forum/viewtopic.php?f=5&t=11480 |
Page 1 of 1 |
| Author: | skinny [ Fri Apr 30, 2010 11:18 pm ] |
| Post subject: | v6 transfercase |
hi, does anybody know if a 1.6 transfer case will mate up to a v6 gearbox? thanks, skinny. |
|
| Author: | crazynic [ Sun May 09, 2010 6:30 am ] |
| Post subject: | Re: v6 transfercase |
Need more info...... |
|
| Author: | steak_knife [ Sun May 09, 2010 6:33 am ] |
| Post subject: | Re: v6 transfercase |
skinny wrote: hi, does anybody know if a 1.6 transfer case will mate up to a v6 gearbox?
thanks, skinny. No, look the same, but no. |
|
| Author: | joeblow [ Sun May 09, 2010 9:38 am ] |
| Post subject: | Re: v6 transfercase |
depends on the size of the v6. |
|
| Author: | steak_knife [ Sun May 09, 2010 9:46 am ] |
| Post subject: | Re: v6 transfercase |
joeblow wrote: depends on the size of the v6.
So the SV's fit??
I know the SQ's are different. |
|
| Author: | skinny [ Sun May 09, 2010 9:52 am ] |
| Post subject: | Re: v6 transfercase |
thanks for the info, i'm a bit new at this, my friend has just bought a 2 litre v6 auto and the 4wd lever keeps jumping back out of gear while attempting to hold it in, and in the dirt with the brakes lightly on does'nt seem to transmit power to the front wheels? oh,it's got those horrible auto hubs too. i'm used to simple sierra's. thanks |
|
| Author: | joeblow [ Sun May 09, 2010 9:58 am ] |
| Post subject: | Re: v6 transfercase |
skinny wrote: thanks for the info, i'm a bit new at this, my friend has just bought a 2 litre v6 auto and the 4wd lever keeps jumping back out of gear while attempting to hold it in, and in the dirt with the brakes lightly on does'nt seem to transmit power to the front wheels? oh,it's got those horrible auto hubs too.
i'm used to simple sierra's. thanks does it have a body lift? |
|
| Author: | tombutt [ Sun May 09, 2010 9:58 am ] |
| Post subject: | Re: v6 transfercase |
might be worth pulling the lever out and seeing if the selector is bent mine did the same thing after a log pushed my transfer case right up. But have read of it happening when people leant on them |
|
| Author: | skinny [ Sun May 09, 2010 10:07 am ] |
| Post subject: | Re: v6 transfercase |
she's stock standered height and is it possible to get to the selector when the lever is pulled out? |
|
| Author: | skinny [ Sun May 09, 2010 10:10 am ] |
| Post subject: | Re: v6 transfercase |
more info just came in, it seems to jump mainly in low range. |
|
| Author: | joeblow [ Sun May 09, 2010 10:16 am ] |
| Post subject: | Re: v6 transfercase |
from memory a wise old suzuki mechanic once told me there was an issue with a very select few t/cases that had thier synchro rings installed ass about which would cause your issue. |
|
| Author: | skinny [ Sun May 09, 2010 10:22 am ] |
| Post subject: | Re: v6 transfercase |
oh lovely, i was hopeing for something simple that did'nt involve dismantling it. but thanks |
|
| Author: | want33s [ Sun May 09, 2010 12:52 pm ] |
| Post subject: | Re: v6 transfercase |
joeblow wrote: from memory a wise old suzuki mechanic once told me there was an issue with a very select few t/cases that had thier synchro rings installed ass about which would cause your issue.
Synchro rings? In a transfer case? Why? |
|
| Author: | steak_knife [ Sun May 09, 2010 8:18 pm ] |
| Post subject: | Re: v6 transfercase |
want33s wrote: joeblow wrote: from memory a wise old suzuki mechanic once told me there was an issue with a very select few t/cases that had thier synchro rings installed ass about which would cause your issue. Synchro rings? In a transfer case? Why? Ease of operation, ever noticed you can move out of & into low when the car's moving?? |
|
| Author: | joeblow [ Sun May 09, 2010 9:21 pm ] |
| Post subject: | Re: v6 transfercase |
you know what i mean (engaging collar). they are different thickness front to back, if installed the wrong way won't engoge properly. |
|
| Author: | skinny [ Mon May 10, 2010 11:55 am ] |
| Post subject: | Re: v6 transfercase |
thanks very much guys, i'll let her know. |
|
| Author: | losfer [ Mon May 10, 2010 12:22 pm ] |
| Post subject: | Re: v6 transfercase |
No "synchro" rings in transfer cases , only selector hubs. i would be betting on worn engagement teeth on 4 low gear and selector hub outer ring |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|