auszookers.com
http://auszookers.com/forum/

g16a efi loom
http://auszookers.com/forum/viewtopic.php?f=5&t=11721		 Page 1 of 1
Author:  rogerworkman [ Mon May 10, 2010 9:04 am ]
Post subject:  g16a efi loom
hello all i recently bought a 16 valve g16a efi engine with no wiring loom or computer and i plan to fit it in my lwb sierra.What i want to no is what wiring loom and computer will suit this motor or if a g16b loom and computer will be the same thanks
Author:  steak_knife [ Mon May 10, 2010 9:11 am ]
Post subject:  Re: g16a efi loom
do you know what the eng is out of off??
Author:  rogerworkman [ Mon May 10, 2010 9:16 am ]
Post subject:  Re: g16a efi loom
it was removed from a vitara but it is spose 2 be a import motor
Author:  steak_knife [ Mon May 10, 2010 9:23 am ]
Post subject:  Re: g16a efi loom
Dose it still have any sensor's on it??
Can you read a name on em??
Author:  Rusho [ Mon May 10, 2010 9:24 am ]
Post subject:  Re: g16a efi loom
I had a chat to fatzook about this one. You will need to know a few different things. How many pins on dizzy, different looms = different plugs, oxygen sensor, these are just a few from memory.
Author:  rogerworkman [ Mon May 10, 2010 9:40 am ]
Post subject:  Re: g16a efi loom
just had a quick look the dizzy has a 7 pin plug but i carnt read any names on the sensors
Author:  joeblow [ Mon May 10, 2010 9:58 am ]
Post subject:  Re: g16a efi loom
rogerworkman wrote:
just had a quick look the dizzy has a 7 pin plug but i carnt read any names on the sensors


7 pin dizzy?.....oh....they are the fun ones..... :wink:
Author:  rogerworkman [ Mon May 10, 2010 10:02 am ]
Post subject:  Re: g16a efi loom
care to explain a bit more
Author:  nissvit [ Mon May 10, 2010 11:12 am ]
Post subject:  Re: g16a efi loom
is that with a dizzy with a integral coil?
if so its from a late vitara, approx 95/96 model... from factory should use a three wire air flow meter..
Author:  steak_knife [ Mon May 10, 2010 11:21 am ]
Post subject:  Re: g16a efi loom
nissvit wrote:
is that with a dizzy with a integral coil?
if so its from a late vitara, approx 95/96 model... from factory should use a three wire air flow meter..


Do you know made the component's??

I know there is 2, Denso & Mitsubishi.
Author:  nissvit [ Mon May 10, 2010 11:51 am ]
Post subject:  Re: g16a efi loom
my earlier (92) vit lwb had the five wire AFM, seperate coil from dizzy and used denso ECU.
the latest toy (a '96) has the three wire AFM, and the integral coil in dizzy arrangment and uses the Mitsu ECU.

in between there was a few years that used a three wire AFM and had a seperate coil.. but don't know the ECU manufacturer.. anyone got a '94 EFI Vit that can be checked?
Author:  steak_knife [ Mon May 10, 2010 11:53 am ]
Post subject:  Re: g16a efi loom
nissvit wrote:
my earlier (92) vit lwb had the five wire AFM, seperate coil from dizzy and used denso ECU.
the latest toy (a '96) has the three wire AFM, and the integral coil in dizzy arrangment and uses the Mitsu ECU.

in between there was a few years that used a three wire AFM and had a seperate coil.. but don't know the ECU manufacturer.. anyone got a '94 EFI Vit that can be checked?


I have an eng that i think is 92, 3 wire AFM & a separate coil with mitsu ECU.
Author:  Fatzook [ Mon May 10, 2010 1:34 pm ]
Post subject:  Re: g16a efi loom
nissvit wrote:
is that with a dizzy with a integral coil?
if so its from a late vitara, approx 95/96 model... from factory should use a three wire air flow meter..


Correct. And the ECU has a 2 plug arrangement for manual, or 3 plug for auto. The harness is made up of 3 parts including the loom that wraps around the block.

You MUST get the right loom, otherwise it will not work.
Author:  banga [ Mon May 10, 2010 6:41 pm ]
Post subject:  Re: g16a efi loom
this is the motor we pulled out of my 94lwb when we swapped them over we ran into this problem so we swapped the dizzy over with my old one so it plugged straight in plus i had brand new leads, cap and rotor for it air flow meter plugged straight into the 94 model one but o2sensor was different.
it kind good cause now i know what year model the motor i got was.
Author:  rogerworkman [ Mon May 10, 2010 8:05 pm ]
Post subject:  Re: g16a efi loom
so this motor should be from a 95/96 vitara
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/