auszookers.com
http://auszookers.com/forum/

RIP: my G13
http://auszookers.com/forum/viewtopic.php?f=5&t=1438		 Page 1 of 1
Author:  the_orb [ Sat Oct 20, 2007 5:23 am ]
Post subject:  RIP: my G13
well replacement is now imminent as my no. 3 cylinder stops firing after 250k's due to oiling up, it is followed shortly by no. 4 and then i am left with a top speed of 60, if the wind blows the right direction 8O .

at the moment I have three options:

1. 1600cc short motor from suzi sport, parts: $1300, labor: a case of beer(backyard installation)

2. engine reco + bore to 1.4/5/6(can't remember what the guy said now :oops: ) supplied and fitted: $1600 at an engine shop

3. 100% brand new engine from the suzuki dealer, supplied and fitted: $2500

opinions...?
Author:  sp1086 [ Sat Oct 20, 2007 11:00 am ]
Post subject:  Re: RIP: my G13
I have a spare G16A with 8V head in good nick all manifolds carby ect if you need it. Just bottom end stuffed! ;)
Author:  Fluffy [ Sat Oct 20, 2007 12:18 pm ]
Post subject:  Re: RIP: my G13
rang suzi sport a little while back they had a 2nd hand g16 short for 950.
Author:  the_orb [ Sat Oct 20, 2007 9:29 pm ]
Post subject:  Re: RIP: my G13
sp1086 wrote:
I have a spare G16A with 8V head in good nick all manifolds carby ect if you need it. Just bottom end stuffed! ;)


thanks but ill have my hands on a gti head for later on
Author:  the_orb [ Sat Oct 20, 2007 9:31 pm ]
Post subject:  Re: RIP: my G13
Fluffy wrote:
rang suzi sport a little while back they had a 2nd hand g16 short for 950.


yeah thats the origin of option 1, order from them and get my m8 to install
Author:  tate_alec [ Mon Oct 22, 2007 9:35 pm ]
Post subject:  Re: RIP: my G13
Hi Orb,

Which engine shop in Canberra was Option 2 from?

Cheers

tate_alec
Author:  the_orb [ Tue Oct 23, 2007 12:57 am ]
Post subject:  Re: RIP: my G13
tate_alec wrote:
Hi Orb,

Which engine shop in Canberra was Option 2 from?

Cheers

tate_alec


Cant think of the name, it was in queanbeyan, ill get the name Wednesday arvo.

Do you know anyone better/cheaper?
Author:  tate_alec [ Tue Oct 23, 2007 2:58 pm ]
Post subject:  Re: RIP: my G13
Nah, sorry I don't know anyone cheaper.
The reason I asked was during my half assed effort a couple of months ago, the cheapest I could find was about $2500.

I've made the decision to keep driving until it blows up and then probably go for the short engine or see if I can pick up a complete 1.6 through wreckers or privately.

I guess that I'll see what the best option is when the time comes.
Author:  Fluffy [ Tue Oct 23, 2007 3:01 pm ]
Post subject:  Re: RIP: my G13
i rang around a while ago for a G16 and got prices on a 2nd hand runner for 1400 a reco for 1800 and fitted for 2600... pretty sure there all exchange.. so im driuvin mine till it pops
Author:  tate_alec [ Tue Oct 23, 2007 7:21 pm ]
Post subject:  Re: RIP: my G13
I thought that you might be interested in this.
These guys have a g16A engine for $1000 and a G16A Vitara front cut for $1700.
Asian Auto Spares
Not sure what shipping to Canberra would be.

Hope this helps.
Author:  tate_alec [ Wed Nov 14, 2007 3:10 pm ]
Post subject:  Re: RIP: my G13
Hey Orb,

Did you get that new engine in yet?
If so what option did you take?

Cheers
Author:  the_orb [ Thu Nov 15, 2007 1:34 am ]
Post subject:  Re: RIP: my G13
tate_alec wrote:
Hey Orb,

Did you get that new engine in yet?
If so what option did you take?

Cheers


I wish, i burned out the clutch and the car wouldnt move, so I get it back 2moz with a $600 bill. so I start the saving process again :( Last exam (ever :woohoo: :woohoo: :woohoo: ) is on Tuesday so I will be able to work a whole lot more. We had a quick peak in the engine (very cool fiber optic cameras 8) because we could) and it appears that its just burned out rings and no other damage. so Queanbeyan engine shop will be putting in just new rings and servicing the head, and all the rest. Not a full re-co but will be enough to restore it to its former glory.
Author:  tate_alec [ Thu Nov 15, 2007 1:32 pm ]
Post subject:  Re: RIP: my G13
Forgive me for asking, but how much is that going to set you back?
The reason I'm asking is, I think (I haven't diagnosed it yet) that I've got either poorly seated valves or dodgy rings.
I should find the time to diagnose it properly in the next couple of weeks.
Author:  the_orb [ Thu Nov 15, 2007 10:04 pm ]
Post subject:  Re: RIP: my G13
tate_alec wrote:
Forgive me for asking, but how much is that going to set you back?
The reason I'm asking is, I think (I haven't diagnosed it yet) that I've got either poorly seated valves or dodgy rings.
I should find the time to diagnose it properly in the next couple of weeks.


using the camera? Urrrrr i may or may not have borrowed it from the physics department :wink: it was my teachers idea, he said it would b "cool" to do it

but yeah all the valves were smooth and flush to the head, no sign of oil there, but the rings we could see oil seeping in as we cranked(by hand) the motor.

Queanbeyan quoted be about a grand to service the head and do the rings

as i said it was very cool 8)
Author:  redhotzook [ Fri Nov 16, 2007 12:52 am ]
Post subject:  Re: RIP: my G13
if your on the gold coast get back to me, cause im an engine rebuilder and im pretty sure we can beat that price... by alot.

oh and CHRIS do u still have that stuffed bottom end 8valve vitara engine?? im very keen to buy it off u!!! now!! haha please get back to me aswell ahah
Author:  the_orb [ Fri Nov 16, 2007 1:01 am ]
Post subject:  Re: RIP: my G13
redhotzook wrote:
if your on the gold coast get back to me, cause im an engine rebuilder and im pretty sure we can beat that price... by alot.

oh and CHRIS do u still have that stuffed bottom end 8valve vitara engine?? im very keen to buy it off u!!! now!! haha please get back to me aswell ahah


hmmm could be interested, ill be on the gold coast some time in Jan 08, but wont be there for more than a few days, and id still have 2 play the endurance game all the way up there
Author:  redhotzook [ Fri Nov 16, 2007 1:08 am ]
Post subject:  Re: RIP: my G13
tru, where abouts u from?? ill get a price for u to completely rebuild your engine. that way it will be maximum price, anything u dont need doing will just make it cheaper. unless u know exactly what needs to be done??
Author:  the_orb [ Fri Nov 16, 2007 1:55 am ]
Post subject:  Re: RIP: my G13
we r quite sure its just the rings but if the price is right...

Im from Canberra
Author:  redhotzook [ Fri Nov 16, 2007 1:59 am ]
Post subject:  Re: RIP: my G13
woow thats a long way to drive a suzuki!! i get worried driving mine from gold coast to ipswich ahahah
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/