[MrRocky]

First post on here, unfortunately its not a flash one but...
Currently putting an early model baleno motor with dizzy and single coil into my sierra and cant find any diagrams/pinouts to suit my ecu. Its really doin my head in, ive been on the computer for the last 2 days trying to find something.

I have even considered putting the 1ltr back in.

The ecu reads
6K
1.6 E24
33920 - 60GM 2
112000 - 4540

Any help appreciated
cheers mick

[eldo]

reckon if you post up some pics of your beast someone will help you out.

[Fatzook]

MrRocky wrote:

First post on here, unfortunately its not a flash one but...
Currently putting an early model baleno motor with dizzy and single coil into my sierra and cant find any diagrams/pinouts to suit my ecu. Its really doin my head in, ive been on the computer for the last 2 days trying to find something.

I have even considered putting the 1ltr back in.

The ecu reads
6K
1.6 E24
33920 - 60GM 2
112000 - 4540

Any help appreciated
cheers mick

I replied on outers.

[Joe]

eldo wrote:

reckon if you post up some pics of your beast someone will help you out.

x2 we like pics around here

[MrRocky]

sorry guys how rude of me

[Joe]

That second last pic looks like it was a brown pants moment
Welcome to AZ matey ya got a nice trayback hopefully someone on here can help ya out with ya wiring probs

[MrRocky]

suprisingly it floated across and i got 3/4 of the way up the bank and thought id just reverse and have another go. I didnt realise i floated and when i reversed i floated for about 2 secs then went down to the bottom of the steering wheel. Attatching the snatch was interesting, finally had to get winched out, turned they key she fired first go and of she went haha

[Joe]

Sweet any luck with the wiring it sucks working on cars in this heat aye

[MrRocky]

progress is slow, i just killed one ecu by mixing up an earth with a power haha oops smoky

[PJ.zook]

Yeh someone needs to invent some kind of compressor to put the smoke back into the components.

[MrRocky]

ITS ALIVE

had to replace the ecu as i suspected it was fried
Just took her for a lap around the block and i reckon its quicker than my v8 cruiser, but jeez the lifters are sooo noisy.
The 6;5 gears and 4.1 diffs make it seem a bit quicker than it is i think.

[Joe]

Good job matey well done

[zooktastic]

hey guys im chasing a wiring diagram for the same motor. any help will be greatly appreciated

[MrRocky]

scroll down and follow the links, i got my diagram from redline gti but im not to sure what thread it was in see if the ones listed match your ecu, if not you will have to search the site.

http://www.redlinegti.com/forum/vtn.177710.htm

its the links down the bottom from thegreatestsuzukisiteintheworld i think
double check as there are heaps of variants that are the wrong diagrams

[xedent]

Can you post some pics of your engine bay ?

[zooktastic]

already have them diagrams, my wiring doesnt match any diagram i have come across yet the wiring came with the motor so i have no idea wether it is the right loom. ill get an engine bay pic 2moro, not sure how much help it will be tho...

[steak_knife]

When thay show a pic of a plug, it's ALWAY'S the back of the plug..

have another look at the wiring diag knowing that..

[zooktastic]

i looked at it from both sides. the bigger of the 3 ecu plugs has the middle 6 terminals on the bottom row blank which doesnt really match any diagrams. :S

[steak_knife]

Is it an import eng??

If you have all other base's covered??, see if it will run with out em..

do thay go anywhere in the harness??

[zooktastic]

im not sure, i bought the loom an ecu with the motor from some bloke in maitland. im starting to wonder if the loom is meant for the ecu? or if the 2 were pulled from different cars :S it came from a wrecking yard so anything is possible... im stumped honestly