| Author |
Message |
carlos83

az supporter
Joined: Mon Jun 28, 2010 3:16 am Posts: 124 Location: Perth, WA
|
 Posted: Wed Oct 27, 2010 4:32 am |
|
|
I've spotted some 2nd hand ARB Bullbars for the Jimny going cheap but they don't come with mounts/brackets. I've been looking around for a while and can't find where to get them from. Does anyone know where I could get hold of these.
Also, how do I find out if they are airbag compatible?
Finally, due to the weight will I have to do something about the suspension? Its currently got stock suspension. I was thinking along the lines of coil spacers for the front, higers spacers for front, say 30mm on front, 15mm on rear.
Any suggestions would be much appreciated.
|
|
|
|
 |
carlos83

az supporter
Joined: Mon Jun 28, 2010 3:16 am Posts: 124 Location: Perth, WA
|
 Posted: Wed Oct 27, 2010 4:42 am |
|
|
I've spoken to ARB and they can't get me the mounts till next year!
|
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Wed Oct 27, 2010 4:53 am |
|
|
from what i have heard arb have a big back long of orders from Jimny bull bars anyway...
how cheap is cheap?
|
|
|
|
 |
dm90
Joined: Sun Nov 29, 2009 10:30 pm Posts: 4349 Location: Perth
|
 Posted: Wed Oct 27, 2010 5:08 am |
|
|
didnt i see your jimny for sale on gumtree? you keeping it now?
you coming on the big perth trip?
i had stock suspension with my bar, no probs, but over time i think they springs will sag.
im pretty sure all ARB bars are airbag compatible.
benz is right, there is a huge backlog. so mounting brackets may also be hard to come by
|
|
|
|
 |
lordviper556
Joined: Wed Oct 14, 2009 10:30 pm Posts: 716 Location: sunny coast qld
|
 Posted: Wed Oct 27, 2010 6:05 am |
|
|
you might have to make your own. i think u will be pretty right with the springs, i didnt notice any sagging on mine but i got toughdog coils.
|
|
|
|
 |
carlos83

az supporter
Joined: Mon Jun 28, 2010 3:16 am Posts: 124 Location: Perth, WA
|
 Posted: Wed Oct 27, 2010 6:11 am |
|
|
Cheers guys. Any ideas of someone in perth who could make up the mounts for me? And does anyone have the pattern for the mounts so they know what to make?
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Oct 27, 2010 6:31 am |
|
ARB Jimny mounts.
_________________ You're just hating because you don't understand
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Wed Oct 27, 2010 7:04 am |
|
|
what year is it?.....i'll see what strings i can pull.....
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Oct 27, 2010 7:05 am |
|
|
_________________ You're just hating because you don't understand
|
|
|
|
 |
carlos83

az supporter
Joined: Mon Jun 28, 2010 3:16 am Posts: 124 Location: Perth, WA
|
 Posted: Wed Oct 27, 2010 7:55 am |
|
|
Cheers guys. Thats the one, 2001 Soft-top.
I'm still thinking of selling it as I've now got a GV and we don't need two cars, but then spotted these bars going cheap ($200) and got tempted. Worst case I still sell it and these add some value to the sale price.
joeblow, if you could tha would be awesome.
|
|
|
|
 |
carlos83

az supporter
Joined: Mon Jun 28, 2010 3:16 am Posts: 124 Location: Perth, WA
|
 Posted: Wed Oct 27, 2010 7:58 am |
|
dm90 wrote: didnt i see your jimny for sale on gumtree? you keeping it now?
you coming on the big perth trip?
i had stock suspension with my bar, no probs, but over time i think they springs will sag.
im pretty sure all ARB bars are airbag compatible.
benz is right, there is a huge backlog. so mounting brackets may also be hard to come by
When's the perth trip? I must have missed the thread
|
|
|
|
 |
vermin

az supporter
Joined: Mon Nov 02, 2009 10:30 pm Posts: 1441 Location: Clarkson W.A.
|
 Posted: Wed Oct 27, 2010 8:11 am |
|
|
I just busted my ARB bar...my mounts might still be OK.
PM me and I will take a look if you are interested in. Might need info on exactly what I am looking for as the bar is in bits in my garage.
Also...where did you see the bars?
_________________ 09 Jimny Sierra Limited Edition
|
|
|
|
 |
vermin

az supporter
Joined: Mon Nov 02, 2009 10:30 pm Posts: 1441 Location: Clarkson W.A.
|
 Posted: Wed Oct 27, 2010 8:13 am |
|
|
Also I have 20mm longer springs in the front of my rig as it did start to sage within a few months - it's nice and level now.
40mm rear
60mm front
Both TD coils and shocks.
_________________ 09 Jimny Sierra Limited Edition
|
|
|
|
 |
dm90
Joined: Sun Nov 29, 2009 10:30 pm Posts: 4349 Location: Perth
|
 Posted: Wed Oct 27, 2010 9:50 am |
|
carlos83 wrote: dm90 wrote: didnt i see your jimny for sale on gumtree? you keeping it now?
you coming on the big perth trip?
i had stock suspension with my bar, no probs, but over time i think they springs will sag.
im pretty sure all ARB bars are airbag compatible.
benz is right, there is a huge backlog. so mounting brackets may also be hard to come by When's the perth trip? I must have missed the thread
http://www.auszookers.com/index.php?nam ... ic&t=13402
DO IT!!!!
|
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Wed Oct 27, 2010 9:55 am |
|
carlos83 wrote: I've spotted some 2nd hand ARB Bullbars for the Jimny going cheap but they don't come with mounts/brackets. I've been looking around for a while and can't find where to get them from. Does anyone know where I could get hold of these.
Also, how do I find out if they are airbag compatible?
Finally, due to the weight will I have to do something about the suspension? Its currently got stock suspension. I was thinking along the lines of coil spacers for the front, higers spacers for front, say 30mm on front, 15mm on rear.
Any suggestions would be much appreciated.
they are just tested to prove the air bags still work fine with the bull bar on
and yes come to the big zook meet-up
|
|
|
|
 |
smiffkid

az supporter
Joined: Fri Aug 13, 2010 12:55 pm Posts: 3266 Location: perth wa
|
 Posted: Wed Oct 27, 2010 12:06 pm |
|
|
yea where did you find these bars im keen.
you should deffinitly come on our trip to warren river. gonna be great.
_________________ dodgy brothers mechanical
|
|
|
|
 |
dm90
Joined: Sun Nov 29, 2009 10:30 pm Posts: 4349 Location: Perth
|
 Posted: Wed Oct 27, 2010 12:11 pm |
|
smiffkid wrote: yea where did you find these bars im keen. you should deffinitly come on our trip to warren river. gonna be great.
i was talking about the big pre xmas trip,
but you are welcome to come on the camping trip, just look in the trips section
|
|
|
|
 |
carlos83

az supporter
Joined: Mon Jun 28, 2010 3:16 am Posts: 124 Location: Perth, WA
|
 Posted: Sun Oct 31, 2010 12:16 am |
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Sun Oct 31, 2010 3:29 am |
|
|
looks pretty second hand...
|
|
|
|
 |
|