Not very, even an idiot like me can manage!
| auszookers.com http://auszookers.com/forum/ |
|
| reduction gears http://auszookers.com/forum/viewtopic.php?f=5&t=16292 |
Page 1 of 1 |
| Author: | stewy91 [ Thu Oct 28, 2010 4:58 am ] |
| Post subject: | reduction gears |
hey guys was just wondering if anyone could help me out im am going to run 31's and was looking at getting the 6.5.1 set of reduction gears would that work out okay or would the gearing still be out |
|
| Author: | 31zook [ Thu Oct 28, 2010 5:02 am ] |
| Post subject: | Re: reduction gears |
be perfect for a worn out sierra motor, if you had a buzzy vit or baleno motor i would make it less geared.... |
|
| Author: | stewy91 [ Thu Oct 28, 2010 5:04 am ] |
| Post subject: | Re: reduction gears |
well i am looking at throwing a 1.6 in it further down the track but i couldn't find any one then has that much variety in reduction gears to chose from that is why i was looking at the 6.5.1s |
|
| Author: | Gwagensteve [ Thu Oct 28, 2010 5:16 am ] |
| Post subject: | Re: reduction gears |
The gearing will be spot on on road (or near enough) off road, some people find 31's and 6.5's a bit to low geared, but if you like driving steep, technical terrain they are fine. If you are more into moderate terrain, flatter country and mud, you might be better with 4.9's or even 4.1's. Steve. |
|
| Author: | stewy91 [ Thu Oct 28, 2010 5:24 am ] |
| Post subject: | Re: reduction gears |
well i was looking at the 4.9s also but i can only find them on lowrange does anyone know were i can them here within a week or so |
|
| Author: | Ben_Sierra [ Thu Oct 28, 2010 5:32 am ] |
| Post subject: | Re: reduction gears |
stewy91 wrote: well i was looking at the 4.9s also but i can only find them on lowrange does anyone know were i can them here within a week or so
Doesn't really matter who you order them through, they come from the states. Lowrange are the cheapest, and pretty quick on shipping. |
|
| Author: | stewy91 [ Thu Oct 28, 2010 5:35 am ] |
| Post subject: | Re: reduction gears |
alright well i might just order them tonight but was also wondering how hard are they to fit |
|
| Author: | Ben_Sierra [ Thu Oct 28, 2010 5:47 am ] |
| Post subject: | Re: reduction gears |
Not very, even an idiot like me can manage!
|
|
| Author: | Bruce [ Thu Oct 28, 2010 5:48 am ] |
| Post subject: | Re: reduction gears |
http://www.puresuzuki.com/Rockcrawler5.14.htm Perfect I find this set for me. Running 31's |
|
| Author: | nato78 [ Thu Oct 28, 2010 6:17 am ] |
| Post subject: | Re: reduction gears |
I got my stuff from lowrange in 5 working days, I don't think any of the oz companies will beat that. |
|
| Author: | stewy91 [ Thu Oct 28, 2010 6:20 am ] |
| Post subject: | Re: reduction gears |
okay well thanks for the help guys i will chose one of them |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|