| auszookers.com http://auszookers.com/forum/ |
|
| which transfer wt or nt? http://auszookers.com/forum/viewtopic.php?f=5&t=16313 |
Page 1 of 1 |
| Author: | Ridge [ Fri Oct 29, 2010 4:26 am ] |
| Post subject: | which transfer wt or nt? |
i need a transfer case to put my 6.5s into, i have access to a free one from a nt with the hand break on the rear output, or a cheap wt case. can i pull off the hand break drum and fit a wt flange instead? I will have a hand break with my rear disc conversion. |
|
| Author: | tanshi [ Fri Oct 29, 2010 4:28 am ] |
| Post subject: | Re: which transfer wt or nt? |
yes you can put a flange on, it needs to be the correct one from the rear i believe as they are different to the front and top flanges |
|
| Author: | Gwagensteve [ Fri Oct 29, 2010 4:36 am ] |
| Post subject: | Re: which transfer wt or nt? |
Just remember that the NT and WT flange patterns are different, so if you swap the NT handbrake onto a WT case you'll also need a nt yoke for your rear driveshaft. Steve. |
|
| Author: | Ridge [ Fri Oct 29, 2010 6:11 am ] |
| Post subject: | Re: which transfer wt or nt? |
great, i already have some wt flanges and shafts. ill get started on it this weekend. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|