| auszookers.com http://auszookers.com/forum/ |
|
| projecta dc20 on a jimny http://auszookers.com/forum/viewtopic.php?f=5&t=16318 |
Page 1 of 1 |
| Author: | NotNormal [ Fri Oct 29, 2010 6:58 am ] |
| Post subject: | projecta dc20 on a jimny |
Hi there all Has any one had some experience with the Projecta DC20, (3 Stage Automatic 12V to 12V 20Amp Battery Charger) and a Jimny. My plan is to fit a battery to a trailer and use a unit like this to keep it charged while driving. Cheers |
|
| Author: | hutch [ Fri Oct 29, 2010 7:04 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
Im not an expert but I would have though that 20amps is a bit low for recharging the battery to use for camping duties etc. Most alternators put out between 50-100 amps. |
|
| Author: | royce [ Fri Oct 29, 2010 7:10 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
Interesting bit of kit, I bet they cost a bomb I wouldnt use one because They are wrong in the instructional video about not needing heavy cable, ohms law is ohms law modern alternators do a fairly good job of charging batteries and if you are cutting your capacity that close your designed it wrong Projecta arent a great brand because you are running the battery in a trailer that wont be under charge a lot you might be better with a conventional isolator and a ctek 240v charger to maintain it when its parked up |
|
| Author: | hutch [ Fri Oct 29, 2010 9:15 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
royce wrote: a ctek 240v charger to maintain it when its parked up
i got one of them for my camper back...its the bees kness : the ducks nuts... i tell ya! |
|
| Author: | squizzytaylor [ Fri Oct 29, 2010 10:25 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
I have sold a shit load of these and they brilliant, operate at anywhere from 9-32 volts. Not quite as cheap as the Projecta but I haver seen a warranty claim. GT http://redarc.com.au/products-and-servi ... ry-charger |
|
| Author: | royce [ Fri Oct 29, 2010 10:29 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
how much are they? |
|
| Author: | squizzytaylor [ Fri Oct 29, 2010 10:44 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
Retail was around $320-350 from memory. |
|
| Author: | hermsie62 [ Fri Oct 29, 2010 10:45 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
And recently CTEK have added one to the list. Paul http://www.batteriesdirect.com.au/shop/ ... d250s.html |
|
| Author: | NotNormal [ Fri Oct 29, 2010 10:59 am ] |
| Post subject: | Re: projecta dc20 on a jimny |
Thats the sort of thing I was looking for as I don't take a gen set with me. Thanks guys |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|